On the helios64 board the two connectors P6 and P7 are supposed to
power two fans. Add the corresponding pwm-fan devices.
Signed-off-by: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
---
.../dts/rockchip/rk3399-kobol-helios64.dts | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
index 39a1d276bd05..1dd9535520b2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
@@ -58,6 +58,20 @@ led-1 {
};
};
+ fan1 {
+ /* fan connected to P7 */
+ compatible = "pwm-fan";
+ pwms = <&pwm0 0 40000 0>;
+ cooling-levels = <0 80 170 255>;
+ };
+
+ fan2 {
+ /* fan connected to P6 */
+ compatible = "pwm-fan";
+ pwms = <&pwm1 0 40000 0>;
+ cooling-levels = <0 80 170 255>;
+ };
+
vcc1v8_sys_s0: vcc1v8-sys-s0 {
compatible = "regulator-fixed";
regulator-name = "vcc1v8_sys_s0";
@@ -352,6 +366,16 @@ &pmu_io_domains {
status = "okay";
};
+&pwm0 {
+ /* pwm-fan on P7 */
+ status = "okay";
+};
+
+&pwm1 {
+ /* pwm-fan on P6 */
+ status = "okay";
+};
+
&sdhci {
bus-width = <8>;
mmc-hs200-1_8v;
--
2.30.2
