This is enough to make the SATA controller visible:
# lspci
00:00.0 PCI bridge: Fuzhou Rockchip Electronics Co., Ltd RK3399 PCI Express Root Port
01:00.0 SATA controller: JMicron Technology Corp. JMB58x AHCI SATA controller
Signed-off-by: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
---
.../dts/rockchip/rk3399-kobol-helios64.dts | 53 +++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
index 1dd9535520b2..3c532c4e1cfe 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
@@ -23,6 +23,16 @@ aliases {
mmc1 = &sdhci;
};
+ avdd_0v9_s0: avdd-0v9-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd_0v9_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&vcc1v8_sys_s3>;
+ };
+
avdd_1v8_s0: avdd-1v8-s0 {
compatible = "regulator-fixed";
regulator-name = "avdd_1v8_s0";
@@ -72,6 +82,18 @@ fan2 {
cooling-levels = <0 80 170 255>;
};
+ pcie_power: pcie-power {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie_pwr>;
+ pinctrl-names = "default";
+ regulator-boot-on;
+ regulator-name = "pcie_power";
+ startup-delay-us = <10000>;
+ vin-supply = <&vcc5v0_perdev>;
+ };
+
vcc1v8_sys_s0: vcc1v8-sys-s0 {
compatible = "regulator-fixed";
regulator-name = "vcc1v8_sys_s0";
@@ -109,6 +131,16 @@ regulator-state-mem {
};
};
+ vcc5v0_perdev: vcc5v0-perdev {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_perdev";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin_bkup>;
+ };
+
vcc5v0_sys: vcc5v0-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
@@ -331,6 +363,20 @@ &io_domains {
status = "okay";
};
+&pcie_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ num-lanes = <2>;
+ status = "okay";
+
+ vpcie12v-supply = <&vcc12v_dcin>;
+ vpcie3v3-supply = <&pcie_power>;
+ vpcie1v8-supply = <&avdd_1v8_s0>;
+ vpcie0v9-supply = <&avdd_0v9_s0>;
+};
+
&pinctrl {
gmac {
gphy_reset: gphy-reset {
@@ -348,6 +394,13 @@ sys_red_led_on: sys-red-led-on {
};
};
+ pcie {
+ pcie_pwr: pcie-pwr {
+ rockchip,pins =
+ <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
--
2.30.2
