On 30-03-21, 23:03, Pratyush Yadav wrote: > Hi, > > This series adds support for CSI2 capture on J721E. It includes some > fixes to the Cadence CSI2RX driver, adds Rx support to Cadence DPHY > driver, and finally adds the TI CSI2RX wrapper driver. > > Tested on TI's J721E with OV5640 sensor. > > Paul Kocialkowski (1): > phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes > > Pratyush Yadav (15): > phy: cdns-dphy: Prepare for Rx support > phy: cdns-dphy: Allow setting mode > phy: cdns-dphy: Add Rx support > media: cadence: csi2rx: Add external DPHY support > media: cadence: csi2rx: Soft reset the streams before starting capture > media: cadence: csi2rx: Set the STOP bit when stopping a stream > media: cadence: csi2rx: Fix stream data configuration > media: cadence: csi2rx: Turn subdev power on before starting stream > media: cadence: csi2rx: Add wrappers for subdev calls > dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX > dt-bindings: media: Add DT bindings for TI CSI2RX driver > media: ti-vpe: csi2rx: Add CSI2RX support > dt-bindings: phy: Convert Cadence DPHY binding to YAML > dt-bindings: phy: cdns,dphy: make clocks optional > dt-bindings: phy: cdns,dphy: add power-domains property Is there any dependency between patches to various subsystems, if not please do consider sending a series per subsystem... Thanks > > .../devicetree/bindings/media/ti,csi2rx.yaml | 70 ++ > .../devicetree/bindings/phy/cdns,dphy.txt | 20 - > .../devicetree/bindings/phy/cdns,dphy.yaml | 52 + > MAINTAINERS | 7 + > drivers/dma/ti/k3-psil-j721e.c | 10 + > drivers/media/platform/Kconfig | 11 + > drivers/media/platform/cadence/cdns-csi2rx.c | 269 ++++- > drivers/media/platform/ti-vpe/Makefile | 1 + > drivers/media/platform/ti-vpe/ti-csi2rx.c | 964 ++++++++++++++++++ > drivers/phy/cadence/cdns-dphy.c | 407 +++++++- > include/linux/phy/phy-mipi-dphy.h | 13 + > 11 files changed, 1754 insertions(+), 70 deletions(-) > create mode 100644 Documentation/devicetree/bindings/media/ti,csi2rx.yaml > delete mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt > create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.yaml > create mode 100644 drivers/media/platform/ti-vpe/ti-csi2rx.c > > -- > 2.30.0 -- ~Vinod
