On Wed, Mar 31, 2021 at 03:03:51PM +0530, Vinod Koul wrote: > On 30-03-21, 23:03, Pratyush Yadav wrote: > > Hi, > > > > This series adds support for CSI2 capture on J721E. It includes some > > fixes to the Cadence CSI2RX driver, adds Rx support to Cadence DPHY > > driver, and finally adds the TI CSI2RX wrapper driver. > > > > Tested on TI's J721E with OV5640 sensor. > > > > Paul Kocialkowski (1): > > phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes > > > > Pratyush Yadav (15): > > phy: cdns-dphy: Prepare for Rx support > > phy: cdns-dphy: Allow setting mode > > phy: cdns-dphy: Add Rx support > > media: cadence: csi2rx: Add external DPHY support > > media: cadence: csi2rx: Soft reset the streams before starting capture > > media: cadence: csi2rx: Set the STOP bit when stopping a stream > > media: cadence: csi2rx: Fix stream data configuration > > media: cadence: csi2rx: Turn subdev power on before starting stream > > media: cadence: csi2rx: Add wrappers for subdev calls > > dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX > > dt-bindings: media: Add DT bindings for TI CSI2RX driver > > media: ti-vpe: csi2rx: Add CSI2RX support > > dt-bindings: phy: Convert Cadence DPHY binding to YAML > > dt-bindings: phy: cdns,dphy: make clocks optional > > dt-bindings: phy: cdns,dphy: add power-domains property > > Is there any dependency between patches to various subsystems, if not > please do consider sending a series per subsystem... Splitting the series per subsystem will facilitate merging, but for the first versions, keeping all patches together facilitate review. I'd prefer if we could have a v2 that still includes everything, until we agree on the interface between the two subsystems. At that point, we can split the series if needed. > > > > .../devicetree/bindings/media/ti,csi2rx.yaml | 70 ++ > > .../devicetree/bindings/phy/cdns,dphy.txt | 20 - > > .../devicetree/bindings/phy/cdns,dphy.yaml | 52 + > > MAINTAINERS | 7 + > > drivers/dma/ti/k3-psil-j721e.c | 10 + > > drivers/media/platform/Kconfig | 11 + > > drivers/media/platform/cadence/cdns-csi2rx.c | 269 ++++- > > drivers/media/platform/ti-vpe/Makefile | 1 + > > drivers/media/platform/ti-vpe/ti-csi2rx.c | 964 ++++++++++++++++++ > > drivers/phy/cadence/cdns-dphy.c | 407 +++++++- > > include/linux/phy/phy-mipi-dphy.h | 13 + > > 11 files changed, 1754 insertions(+), 70 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/media/ti,csi2rx.yaml > > delete mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt > > create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.yaml > > create mode 100644 drivers/media/platform/ti-vpe/ti-csi2rx.c -- Regards, Laurent Pinchart
