Re: [PATCH 1/4] arm64: dts: qcom: sdm845: fix number of pins in 'gpio-ranges'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed 10 Mar 19:19 CST 2021, Shawn Guo wrote:

> On Wed, Mar 10, 2021 at 12:22:32PM -0600, Bjorn Andersson wrote:
> > On Sat 06 Mar 02:00 CST 2021, Shawn Guo wrote:
> > 
> > > On Fri, Mar 05, 2021 at 07:56:02PM -0600, Bjorn Andersson wrote:
> > > > On Fri 05 Mar 19:28 CST 2021, Shawn Guo wrote:
> > > > 
> > > > > On Fri, Mar 05, 2021 at 03:43:08PM -0600, Bjorn Andersson wrote:
> > > > > > On Tue 02 Mar 21:31 CST 2021, Shawn Guo wrote:
> > > > > > 
> > > > > > > The last cell of 'gpio-ranges' should be number of GPIO pins, and in
> > > > > > > case of qcom platform it should match msm_pinctrl_soc_data.ngpio rather
> > > > > > > than msm_pinctrl_soc_data.ngpio - 1.
> > > > > > > 
> > > > > > 
> > > > > > This is a historical artifact, SDM845 has 150 GPIO pins. In addition to
> > > > > > this there's an output-only pin for UFS, which I exposed as an GPIO as
> > > > > > well - but it's only supposed to be used as a reset-gpio for the UFS
> > > > > > device.
> > > > > > 
> > > > > > Perhaps that still mandates that gpio-ranges should cover it?
> > > > > 
> > > > > I think the number in DT gpio-ranges should match msm_pinctrl_soc_data.ngpio.
> > > > > Otherwise, kernel will be confused and be running into the issue like
> > > > > below in some case.
> > > > > 
> > > > > > 
> > > > > > > This fixes the problem that when the last GPIO pin in the range is
> > > > > > > configured with the following call sequence, it always fails with
> > > > > > > -EPROBE_DEFER.
> > > > > > > 
> > > > > > >     pinctrl_gpio_set_config()
> > > > > > >         pinctrl_get_device_gpio_range()
> > > > > > >             pinctrl_match_gpio_range()
> > > > > > 
> > > > > > When do we hit this sequence? I didn't think operations on the UFS
> > > > > > GP(I)O would ever take this code path?
> > > > > 
> > > > > It will, if we have UFS driver booting from ACPI and requesting reset
> > > > > GPIO.
> > > > 
> > > > But does the UFS driver somehow request GPIO 190 on SC8180x?
> > > > 
> > > > I made up the idea that this is a GPIO, there really only is 190 (0-189)
> > > > GPIOs on thie SoC.
> > > > 
> > > > Downstream they use a pinconf node with "output-high"/"output-low" to
> > > > toggle the reset pin and I don't find any references in the Flex 5G
> > > > DSDT.
> > > 
> > > Right now, I do not have to request and configure this UFS GPIO for
> > > getting UFS work with ACPI kernel.  And the immediate problem we have is
> > > that with gpio_chip .set_config patch, devm_gpiod_get_optional() call
> > > from UFS driver always gets -EPROBE_DEFER.
> > > 
> > 
> > But we don't have a "reset" GPIO specified in the ACPI node, or you mean
> > with the introduction of .set_config DT no longer works?
> 
> Yes, DT stops working because of the mismatch between
> msm_pinctrl_soc_data.ngpio and gpio-ranges.
> 

So what you're saying is that when Linus merged the .set_config patch
yesterday he broke storage on every single Qualcomm device?

Regards,
Bjorn



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux