Add the WPSS remoteproc node in dts for PIL loading. Signed-off-by: Rakesh Pillai <pillair@xxxxxxxxxxxxxx> --- - This change is dependent on the below patch series 1) https://lore.kernel.org/patchwork/project/lkml/list/?series=487403 2) https://lore.kernel.org/patchwork/project/lkml/list/?series=488365 --- arch/arm64/boot/dts/qcom/sc7280-idp.dts | 4 +++ arch/arm64/boot/dts/qcom/sc7280.dtsi | 47 +++++++++++++++++++++++++++++++++ 2 files changed, 51 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index 950ecb2..603f56b 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -26,6 +26,10 @@ status = "okay"; }; +&remoteproc_wpss { + status = "okay"; +}; + &uart5 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 8af6d77..26dd466 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -53,6 +53,16 @@ no-map; reg = <0x0 0x80b00000 0x0 0x100000>; }; + + wlan_fw_mem: memory@80c00000 { + no-map; + reg = <0x0 0x80c00000 0x0 0xc00000>; + }; + + wpss_mem: memory@9ae00000 { + no-map; + reg = <0x0 0x9ae00000 0x0 0x1900000>; + }; }; cpus { @@ -305,6 +315,43 @@ }; }; + remoteproc_wpss: remoteproc@8a00000 { + compatible = "qcom,sc7280-wpss-pil"; + reg = <0 0x08a00000 0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 0 0>, + <&wpss_smp2p_in 1 0>, + <&wpss_smp2p_in 2 0>, + <&wpss_smp2p_in 3 0>, + <&wpss_smp2p_in 7 0>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + memory-region = <&wpss_mem>; + + qcom,smem-states = <&wpss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_WCSS_RESTART>; + reset-names = "restart"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x37000>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "wpss"; + qcom,remote-pid = <13>; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sc7280-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>; -- 2.7.4
