From: Rafał Miłecki <rafal@xxxxxxxxxx>
Update nodes names to match leds-gpio.yaml requirements.
Fixes: 29b08ead247a ("arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs")
Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
.../bcm4908/bcm4906-netgear-r8000p.dts | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
index 7b24ad365a3c..41e8fbf095c6 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
@@ -18,55 +18,55 @@ memory@0 {
leds {
compatible = "gpio-leds";
- power-white {
+ led-power-white {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
- power-amber {
+ led-power-amber {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
- wps {
+ led-wps {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
- 2ghz {
+ led-2ghz {
function = "2ghz";
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
- 5ghz-1 {
+ led-5ghz-1 {
function = "5ghz-1";
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
};
- 5ghz-2 {
+ led-5ghz-2 {
function = "5ghz-2";
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
};
- usb2 {
+ led-usb2 {
function = "usb2";
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
};
- usb3 {
+ led-usb3 {
function = "usb3";
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
};
- wifi {
+ led-wifi {
function = "wifi";
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
--
2.26.2
