[PATCH v5 00/18] arm64: dts: imx8: architecture improvement and adding imx8qm support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



IMX SCU based platforms (e.g. MX8QM/MX8QXP) are comprised of a number of SS
(Subsystems), those SS may be shared between different SoCs while most of them
can be reused like Devices Resources, Clocks, Power domains and etc.

This patch series aims to improve the MX8 architecture to comply with the HW
design to save a lot of duplicated codes and benefits us a better
maintainability and scalability in the future.

ChangeLog:
v5:
 * rebase to latest shawn/for-next
 * make mx8qm usdhc compatible with imx8qxp
v4-resend:
 * no change except put three module binding patches first which are used
   by this patchset.
v3->v4:
 * mainly rebase to latest kernel except a few very minor changes like change to use
   new scu protocol binding which was not supported in last version
v2->v3:
 * use clock-indices property instead of bit-offset property suggested by Shawn Guo
 * rebase to latest shawn/for-next
v1->v2:
 * change to the new two cells scu clock binding, so original adding scu clocks
   patches were removed.
 * Move scu pd node above clk node


Dong Aisheng (18):
  dt-bindings: arm: fsl: add imx8qm boards compatible string
  dt-bindings: mailbox: mu: add imx8qm support
  arm64: dts: imx8qxp: add fallback compatible string for scu pd
  arm64: dts: imx8qxp: move scu pd node before scu clock node
  arm64: dts: imx8qxp: orginize dts in subsystems
  arm64: dts: imx8: add lsio lpcg clocks
  arm64: dts: imx8: add conn lpcg clocks
  arm64: dts: imx8: add adma lpcg clocks
  arm64: dts: imx8: switch to two cell scu clock binding
  arm64: dts: imx8: switch to new lpcg clock binding
  arm64: dts: imx8qm: add lsio ss support
  arm64: dts: imx8qm: add conn ss support
  arm64: dts: imx8: split adma ss into dma and audio ss
  arm64: dts: imx8qm: add dma ss support
  arm64: dts: imx: add imx8qm common dts file
  arm64: dts: imx: add imx8qm mek support
  arm64: defconfig: add imx8qm mek support
  firmware: imx: scu-pd: do not power off console domain

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 .../devicetree/bindings/mailbox/fsl,mu.yaml   |   5 +-
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8-ss-adma.dtsi      |   8 +
 .../boot/dts/freescale/imx8-ss-audio.dtsi     |  68 +++
 .../boot/dts/freescale/imx8-ss-conn.dtsi      | 184 ++++++++
 .../arm64/boot/dts/freescale/imx8-ss-ddr.dtsi |  18 +
 .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 202 +++++++++
 .../boot/dts/freescale/imx8-ss-lsio.dtsi      | 311 +++++++++++++
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts  | 144 ++++++
 .../boot/dts/freescale/imx8qm-ss-conn.dtsi    |  21 +
 .../boot/dts/freescale/imx8qm-ss-dma.dtsi     |  51 +++
 .../boot/dts/freescale/imx8qm-ss-lsio.dtsi    |  61 +++
 arch/arm64/boot/dts/freescale/imx8qm.dtsi     | 176 ++++++++
 .../boot/dts/freescale/imx8qxp-ai_ml.dts      |  20 +-
 .../freescale/imx8qxp-colibri-eval-v3.dtsi    |   8 +-
 .../boot/dts/freescale/imx8qxp-colibri.dtsi   |  12 +-
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts |  50 +--
 .../boot/dts/freescale/imx8qxp-ss-adma.dtsi   |  37 ++
 .../boot/dts/freescale/imx8qxp-ss-conn.dtsi   |  25 ++
 .../boot/dts/freescale/imx8qxp-ss-lsio.dtsi   |  61 +++
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi    | 423 ++----------------
 arch/arm64/configs/defconfig                  |   1 +
 drivers/firmware/imx/scu-pd.c                 |  28 +-
 24 files changed, 1481 insertions(+), 440 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-mek.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi

-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux