On Fri, Mar 05, 2021 at 09:17:29PM +0800, Dong Aisheng wrote: > IMX SCU based platforms (e.g. MX8QM/MX8QXP) are comprised of a number of SS > (Subsystems), those SS may be shared between different SoCs while most of them > can be reused like Devices Resources, Clocks, Power domains and etc. > > This patch series aims to improve the MX8 architecture to comply with the HW > design to save a lot of duplicated codes and benefits us a better > maintainability and scalability in the future. > > ChangeLog: > v5: > * rebase to latest shawn/for-next > * make mx8qm usdhc compatible with imx8qxp > v4-resend: > * no change except put three module binding patches first which are used > by this patchset. > v3->v4: > * mainly rebase to latest kernel except a few very minor changes like change to use > new scu protocol binding which was not supported in last version > v2->v3: > * use clock-indices property instead of bit-offset property suggested by Shawn Guo > * rebase to latest shawn/for-next > v1->v2: > * change to the new two cells scu clock binding, so original adding scu clocks > patches were removed. > * Move scu pd node above clk node > > > Dong Aisheng (18): > dt-bindings: arm: fsl: add imx8qm boards compatible string > dt-bindings: mailbox: mu: add imx8qm support > arm64: dts: imx8qxp: add fallback compatible string for scu pd > arm64: dts: imx8qxp: move scu pd node before scu clock node > arm64: dts: imx8qxp: orginize dts in subsystems The dts patches stop applying for me at this one. Please rebase and resend them. Shawn > arm64: dts: imx8: add lsio lpcg clocks > arm64: dts: imx8: add conn lpcg clocks > arm64: dts: imx8: add adma lpcg clocks > arm64: dts: imx8: switch to two cell scu clock binding > arm64: dts: imx8: switch to new lpcg clock binding > arm64: dts: imx8qm: add lsio ss support > arm64: dts: imx8qm: add conn ss support > arm64: dts: imx8: split adma ss into dma and audio ss > arm64: dts: imx8qm: add dma ss support > arm64: dts: imx: add imx8qm common dts file > arm64: dts: imx: add imx8qm mek support > arm64: defconfig: add imx8qm mek support > firmware: imx: scu-pd: do not power off console domain > > .../devicetree/bindings/arm/fsl.yaml | 6 + > .../devicetree/bindings/mailbox/fsl,mu.yaml | 5 +- > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../boot/dts/freescale/imx8-ss-adma.dtsi | 8 + > .../boot/dts/freescale/imx8-ss-audio.dtsi | 68 +++ > .../boot/dts/freescale/imx8-ss-conn.dtsi | 184 ++++++++ > .../arm64/boot/dts/freescale/imx8-ss-ddr.dtsi | 18 + > .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 202 +++++++++ > .../boot/dts/freescale/imx8-ss-lsio.dtsi | 311 +++++++++++++ > arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 144 ++++++ > .../boot/dts/freescale/imx8qm-ss-conn.dtsi | 21 + > .../boot/dts/freescale/imx8qm-ss-dma.dtsi | 51 +++ > .../boot/dts/freescale/imx8qm-ss-lsio.dtsi | 61 +++ > arch/arm64/boot/dts/freescale/imx8qm.dtsi | 176 ++++++++ > .../boot/dts/freescale/imx8qxp-ai_ml.dts | 20 +- > .../freescale/imx8qxp-colibri-eval-v3.dtsi | 8 +- > .../boot/dts/freescale/imx8qxp-colibri.dtsi | 12 +- > arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 50 +-- > .../boot/dts/freescale/imx8qxp-ss-adma.dtsi | 37 ++ > .../boot/dts/freescale/imx8qxp-ss-conn.dtsi | 25 ++ > .../boot/dts/freescale/imx8qxp-ss-lsio.dtsi | 61 +++ > arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 423 ++---------------- > arch/arm64/configs/defconfig | 1 + > drivers/firmware/imx/scu-pd.c | 28 +- > 24 files changed, 1481 insertions(+), 440 deletions(-) > create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-mek.dts > create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8qm.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi > > -- > 2.25.1 >
