From: Grzegorz Jaszczyk <jaz@xxxxxxxxxxxx>
Adding phy description to pcie, sata and usb will allow appropriate drivers
to configure marvell comphy-a3700 accordingly.
Signed-off-by: Grzegorz Jaszczyk <jaz@xxxxxxxxxxxx>
Signed-off-by: Konstantin Porotchkin <kostap@xxxxxxxxxxx>
---
arch/arm64/boot/dts/marvell/armada-3720-db.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 3e5789f37206..15e923f945d4 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -132,11 +132,15 @@
pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
status = "okay";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&comphy1 0>;
};
/* CON3 */
&sata {
status = "okay";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&comphy2 0>;
};
&sdhci0 {
@@ -217,4 +221,7 @@
&usb3 {
status = "okay";
usb-phy = <&usb3_phy>;
+ /* Generic PHY, providing serdes lanes */
+ phys = <&comphy0 0>;
+ phy-names = "usb";
};
--
2.17.1
