Re: [PATCH v4 1/3] dt-bindings:drm/bridge:anx7625:add vendor define flags

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 04, 2021 at 01:38:36PM +0100, Robert Foss wrote:
> Hey Xin,
> 
> On Thu, 28 Jan 2021 at 04:10, Xin Ji <xji@xxxxxxxxxxxxxxxx> wrote:
> >
> > Add 'bus-type' and 'data-lanes' define for port0, add HDCP support
> > flag and DP tx lane0 and lane1 swing register array define.
> >
> > Signed-off-by: Xin Ji <xji@xxxxxxxxxxxxxxxx>
> > ---
> >  .../bindings/display/bridge/analogix,anx7625.yaml  | 54 +++++++++++++++++++++-
> >  1 file changed, 53 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > index c789784..048deec 100644
> > --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > @@ -34,6 +34,24 @@ properties:
> >      description: used for reset chip control, RESET_N pin B7.
> >      maxItems: 1
> >
> > +  analogix,lane0-swing:
> > +    $ref: /schemas/types.yaml#/definitions/uint32-array
> > +    maxItems: 20
> > +    description:
> > +      an array of swing register setting for DP tx lane0 PHY, please don't
> > +      add this property, or contact vendor.
> > +
> > +  analogix,lane1-swing:
> > +    $ref: /schemas/types.yaml#/definitions/uint32-array
> > +    maxItems: 20
> > +    description:
> > +      an array of swing register setting for DP tx lane1 PHY, please don't
> > +      add this property, or contact vendor.
> > +
> > +  analogix,hdcp-support:
> > +    type: boolean
> > +    description: indicate the DP tx HDCP support or not.
> > +
> >    ports:
> >      $ref: /schemas/graph.yaml#/properties/ports
> >
> > @@ -41,13 +59,45 @@ properties:
> >        port@0:
> >          $ref: /schemas/graph.yaml#/properties/port
> >          description:
> > -          Video port for MIPI DSI input.
> > +          Video port for MIPI input.
> 
> Maybe MIPI DSI/DPI input is more correct, since there are a lot of
> other MIPI standards.
Hi Rob, OK, I'll change it in the next series.
Thanks,
Xin
> 
> > +
> > +        properties:
> > +          endpoint:
> > +            type: object
> > +            additionalProperties: false
> > +
> > +            # Properties described in
> > +            # Documentation/devicetree/bindings/media/video-interfaces.txt
> > +            properties:
> > +              remote-endpoint: true
> > +              bus-type: true
> > +              data-lanes: true
> > +
> > +            required:
> > +              - remote-endpoint
> > +
> > +        required:
> > +          - endpoint
> > +
> >
> >        port@1:
> >          $ref: /schemas/graph.yaml#/properties/port
> >          description:
> >            Video port for panel or connector.
> >
> > +        properties:
> > +          endpoint:
> > +            type: object
> > +            additionalProperties: false
> > +
> > +            # Properties described in
> > +            # Documentation/devicetree/bindings/media/video-interfaces.txt
> > +            properties:
> > +              remote-endpoint: true
> > +
> > +            required:
> > +              - remote-endpoint
> > +
> >      required:
> >        - port@0
> >        - port@1
> > @@ -81,6 +131,8 @@ examples:
> >                      reg = <0>;
> >                      anx7625_in: endpoint {
> >                          remote-endpoint = <&mipi_dsi>;
> > +                        bus-type = <5>;
> > +                        data-lanes = <0 1 2 3>;
> >                      };
> >                  };
> >
> > --
> > 2.7.4
> >



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux