Add 'bus-type' and 'data-lanes' define for port0, add HDCP support flag and DP tx lane0 and lane1 swing register array define. Signed-off-by: Xin Ji <xji@xxxxxxxxxxxxxxxx> --- .../bindings/display/bridge/analogix,anx7625.yaml | 54 +++++++++++++++++++++- 1 file changed, 53 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index c789784..048deec 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -34,6 +34,24 @@ properties: description: used for reset chip control, RESET_N pin B7. maxItems: 1 + analogix,lane0-swing: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 20 + description: + an array of swing register setting for DP tx lane0 PHY, please don't + add this property, or contact vendor. + + analogix,lane1-swing: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 20 + description: + an array of swing register setting for DP tx lane1 PHY, please don't + add this property, or contact vendor. + + analogix,hdcp-support: + type: boolean + description: indicate the DP tx HDCP support or not. + ports: $ref: /schemas/graph.yaml#/properties/ports @@ -41,13 +59,45 @@ properties: port@0: $ref: /schemas/graph.yaml#/properties/port description: - Video port for MIPI DSI input. + Video port for MIPI input. + + properties: + endpoint: + type: object + additionalProperties: false + + # Properties described in + # Documentation/devicetree/bindings/media/video-interfaces.txt + properties: + remote-endpoint: true + bus-type: true + data-lanes: true + + required: + - remote-endpoint + + required: + - endpoint + port@1: $ref: /schemas/graph.yaml#/properties/port description: Video port for panel or connector. + properties: + endpoint: + type: object + additionalProperties: false + + # Properties described in + # Documentation/devicetree/bindings/media/video-interfaces.txt + properties: + remote-endpoint: true + + required: + - remote-endpoint + required: - port@0 - port@1 @@ -81,6 +131,8 @@ examples: reg = <0>; anx7625_in: endpoint { remote-endpoint = <&mipi_dsi>; + bus-type = <5>; + data-lanes = <0 1 2 3>; }; }; -- 2.7.4