Re: [PATCH 6/9] ARM: dts: sun7i: Add board support for LinkSprite pcDuino V3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Jul 1, 2014 at 3:12 PM, Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
> Hi,
>
> On 07/01/2014 04:22 AM, Chen-Yu Tsai wrote:
>> On Tue, Jul 1, 2014 at 5:57 AM, Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
>>> From: Zoltan HERPAI <wigyori@xxxxxxx>
>>>
>>> The LinkSprite pcDuino V3 is an A20 based development board featuring
>>> arduino compatible io headers, 1G RAM, 4G nand, sata, rtl8188cus usb wifi
>>> and 100 Mbit ethernet using an ip101a phy:
>>>
>>> http://www.pcduino.com/pcduino-v3/
>>>
>>> Signed-off-by: Zoltan HERPAI <wigyori@xxxxxxx>
>>> [hdegoede@xxxxxxxxxx: Various cleanups, correct led pins]
>>> [hdegoede@xxxxxxxxxx: Add axp209, ir and gpio-keys nodes]
>>> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
>>>
>>> --
>>>
>>> Changes since v2:
>>>  - update MMC entry to comply with upstream
>>>  - unify the 4 patches into one
>>>
>>> Changes since v1:
>>>  - fix cosmetic issues
>>>  - fix i2c entry
>>>  - remove unnecessary input bindings include
>>>  - add MMC support
>>> ---
>>>  arch/arm/boot/dts/Makefile               |   3 +-
>>>  arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 173 +++++++++++++++++++++++++++++++
>>>  2 files changed, 175 insertions(+), 1 deletion(-)
>>>  create mode 100644 arch/arm/boot/dts/sun7i-a20-pcduino3.dts
>>>
>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>> index ed0de8b..fdc590e 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -380,7 +380,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \
>>>         sun7i-a20-cubieboard2.dtb \
>>>         sun7i-a20-cubietruck.dtb \
>>>         sun7i-a20-i12-tvbox.dtb \
>>> -       sun7i-a20-olinuxino-micro.dtb
>>> +       sun7i-a20-olinuxino-micro.dtb \
>>> +       sun7i-a20-pcduino3.dtb
>>
>> You may need to rebase onto my sun8i ippo-q8h dts patch.
>>
>>   https://patchwork.kernel.org/patch/4389951/
>>
>> There's a likely conflict in the Makefile here.
>
> Has that one already been accepted by Maxime ? I'm fine rebasing patches
> on top of accepted stuff, but rebasing on pending stuff is not really
> useful IMHO.

Maxime replied stating he applied it. See the lower part of the patchwork
page.

AFAIK he's accepted my initial sun8i patches and CIR DT patches this cycle.


ChenYu
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux