Document the binding for enabling mtk svs on MediaTek SoC. Signed-off-by: Roger Lu <roger.lu@xxxxxxxxxxxx> --- .../bindings/soc/mediatek/mtk-svs.yaml | 75 +++++++++++++++++++ 1 file changed, 75 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml diff --git a/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml new file mode 100644 index 000000000000..9c7da0acd82f --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mtk-svs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Introduce MTK SVS engine + +maintainers: + - Matthias Brugger <matthias.bgg@xxxxxxxxx> + - Kevin Hilman <khilman@xxxxxxxxxx> + - Nishanth Menon <nm@xxxxxx> + +description: |+ + The Smart Voltage Scaling(SVS) engine is a piece of hardware + which has several controllers(banks) for calculating suitable + voltage to different power domains(CPU/GPU/CCI) according to + chip process corner, temperatures and other factors. Then DVFS + driver could apply SVS bank voltage to PMIC/Buck. + +properties: + compatible: + enum: + - mediatek,mt8183-svs + + reg: + description: Address range of the MTK SVS controller. + maxItems: 1 + + interrupts: + description: IRQ for the MTK SVS controller. + maxItems: 1 + + clocks: + description: Main clock for MTK SVS controller to work. + + clock-names: + const: main + + nvmem-cells: + maxItems: 2 + description: + Phandle to the calibration data provided by a nvmem device. + + nvmem-cell-names: + items: + - const: svs-calibration-data + - const: t-calibration-data + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + svs: svs@1100b000 { + compatible = "mediatek,mt8183-svs"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_THERM>; + clock-names = "main"; + nvmem-cells = <&svs_calibration>, <&thermal_calibration>; + nvmem-cell-names = "svs-calibration-data", "t-calibration-data"; + }; -- 2.18.0
