Add a device tree for the Canaan Kendryte KD233 development board.
This device tree enables LEDs, some gpios and spi/mmc SD card device.
The WS2812B RGB LED and the 10 position rotary dip switch present on
the board are left undefined.
Signed-off-by: Damien Le Moal <damien.lemoal@xxxxxxx>
---
arch/riscv/boot/dts/canaan/k210_kd233.dts | 178 ++++++++++++++++++++++
1 file changed, 178 insertions(+)
create mode 100644 arch/riscv/boot/dts/canaan/k210_kd233.dts
diff --git a/arch/riscv/boot/dts/canaan/k210_kd233.dts b/arch/riscv/boot/dts/canaan/k210_kd233.dts
new file mode 100644
index 000000000000..44852a27df93
--- /dev/null
+++ b/arch/riscv/boot/dts/canaan/k210_kd233.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@xxxxxxxxx>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Kendryte KD233";
+ compatible = "canaan,kendryte-kd233",
+ "canaan,kendryte-k210";
+
+ chosen {
+ bootargs = "earlycon console=ttySIF0";
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led1 {
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key0 {
+ label = "KEY0";
+ linux,code = <BTN_0>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ status = "disabled";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0 0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&mic>;
+ };
+ };
+
+ mic: mic {
+ #sound-dai-cells = <0>;
+ compatible = "memsensing,msm261s4030h0";
+ status = "disabled";
+ };
+};
+
+&fpioa {
+ pinctrl-0 = <&jtag_pinctrl>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ jtag_pinctrl: jtag-pinmux {
+ pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+ <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+ <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+ <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+ };
+
+ uarths_pinctrl: uarths-pinmux {
+ pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
+ <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
+ };
+
+ spi0_pinctrl: spi0-pinmux {
+ pinmux = <K210_FPIOA(6, K210_PCF_GPIOHS20)>, /* cs */
+ <K210_FPIOA(7, K210_PCF_SPI0_SCLK)>, /* wr */
+ <K210_FPIOA(8, K210_PCF_GPIOHS21)>; /* dc */
+ };
+
+ dvp_pinctrl: dvp-pinmux {
+ pinmux = <K210_FPIOA(9, K210_PCF_SCCB_SCLK)>,
+ <K210_FPIOA(10, K210_PCF_SCCB_SDA)>,
+ <K210_FPIOA(11, K210_PCF_DVP_RST)>,
+ <K210_FPIOA(12, K210_PCF_DVP_VSYNC)>,
+ <K210_FPIOA(13, K210_PCF_DVP_PWDN)>,
+ <K210_FPIOA(14, K210_PCF_DVP_XCLK)>,
+ <K210_FPIOA(15, K210_PCF_DVP_PCLK)>,
+ <K210_FPIOA(17, K210_PCF_DVP_HSYNC)>;
+ };
+
+ gpiohs_pinctrl: gpiohs-pinmux {
+ pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,
+ <K210_FPIOA(20, K210_PCF_GPIOHS4)>, /* Rot. dip sw line 8 */
+ <K210_FPIOA(21, K210_PCF_GPIOHS5)>, /* Rot. dip sw line 4 */
+ <K210_FPIOA(22, K210_PCF_GPIOHS6)>, /* Rot. dip sw line 2 */
+ <K210_FPIOA(23, K210_PCF_GPIOHS7)>, /* Rot. dip sw line 1 */
+ <K210_FPIOA(24, K210_PCF_GPIOHS8)>,
+ <K210_FPIOA(25, K210_PCF_GPIOHS9)>,
+ <K210_FPIOA(26, K210_PCF_GPIOHS10)>;
+ };
+
+ spi1_pinctrl: spi1-pinmux {
+ pinmux = <K210_FPIOA(29, K210_PCF_SPI1_SCLK)>,
+ <K210_FPIOA(30, K210_PCF_SPI1_D0)>,
+ <K210_FPIOA(31, K210_PCF_SPI1_D1)>,
+ <K210_FPIOA(32, K210_PCF_GPIOHS16)>; /* cs */
+ };
+
+ i2s0_pinctrl: i2s0-pinmux {
+ pinmux = <K210_FPIOA(33, K210_PCF_I2S0_IN_D0)>,
+ <K210_FPIOA(34, K210_PCF_I2S0_WS)>,
+ <K210_FPIOA(35, K210_PCF_I2S0_SCLK)>;
+ };
+};
+
+&uarths0 {
+ pinctrl-0 = <&uarths_pinctrl>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&gpio0 {
+ pinctrl-0 = <&gpiohs_pinctrl>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&i2s0 {
+ #sound-dai-cells = <1>;
+ pinctrl-0 = <&i2s0_pinctrl>;
+ pinctrl-names = "default";
+};
+
+&dvp0 {
+ pinctrl-0 = <&dvp_pinctrl>;
+ pinctrl-names = "default";
+};
+
+&spi0 {
+ pinctrl-0 = <&spi0_pinctrl>;
+ pinctrl-names = "default";
+ num-cs = <1>;
+ cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+
+ panel@0 {
+ compatible = "ilitek,ili9341";
+ reg = <0>;
+ dc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ spi-max-frequency = <15000000>;
+ status = "disabled";
+ };
+};
+
+&spi1 {
+ pinctrl-0 = <&spi1_pinctrl>;
+ pinctrl-names = "default";
+ num-cs = <1>;
+ cs-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ slot@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ voltage-ranges = <3300 3300>;
+ spi-max-frequency = <25000000>;
+ broken-cd;
+ };
+};
--
2.29.2
