On Sun, Dec 13, 2020 at 7:22 PM Damien Le Moal <damien.lemoal@xxxxxxx> wrote:
>
> Add a device tree for the Canaan Kendryte KD233 development board.
> This device tree enables LEDs, some gpios and spi/mmc SD card device.
> The WS2812B RGB LED and the 10 position rotary dip switch present on
> the board are left undefined.
>
> Signed-off-by: Damien Le Moal <damien.lemoal@xxxxxxx>
> ---
> arch/riscv/boot/dts/canaan/k210_kd233.dts | 178 ++++++++++++++++++++++
> 1 file changed, 178 insertions(+)
> create mode 100644 arch/riscv/boot/dts/canaan/k210_kd233.dts
>
> diff --git a/arch/riscv/boot/dts/canaan/k210_kd233.dts b/arch/riscv/boot/dts/canaan/k210_kd233.dts
> new file mode 100644
> index 000000000000..44852a27df93
> --- /dev/null
> +++ b/arch/riscv/boot/dts/canaan/k210_kd233.dts
> @@ -0,0 +1,178 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019-20 Sean Anderson <seanga2@xxxxxxxxx>
> + * Copyright (C) 2020 Western Digital Corporation or its affiliates.
> + */
> +
> +/dts-v1/;
> +
> +#include "k210.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> + model = "Kendryte KD233";
> + compatible = "canaan,kendryte-kd233",
> + "canaan,kendryte-k210";
> +
> + chosen {
> + bootargs = "earlycon console=ttySIF0";
> + stdout-path = "serial0:115200n8";
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> +
> + led0 {
> + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
> + };
> +
> + led1 {
> + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + key0 {
> + label = "KEY0";
> + linux,code = <BTN_0>;
> + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,format = "i2s";
> + status = "disabled";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&i2s0 0>;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&mic>;
> + };
> + };
> +
> + mic: mic {
> + #sound-dai-cells = <0>;
> + compatible = "memsensing,msm261s4030h0";
> + status = "disabled";
> + };
> +};
> +
> +&fpioa {
> + pinctrl-0 = <&jtag_pinctrl>;
> + pinctrl-names = "default";
> + status = "okay";
> +
> + jtag_pinctrl: jtag-pinmux {
> + pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
> + <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
> + <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
> + <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
> + };
> +
> + uarths_pinctrl: uarths-pinmux {
> + pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
> + <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
> + };
> +
> + spi0_pinctrl: spi0-pinmux {
> + pinmux = <K210_FPIOA(6, K210_PCF_GPIOHS20)>, /* cs */
> + <K210_FPIOA(7, K210_PCF_SPI0_SCLK)>, /* wr */
> + <K210_FPIOA(8, K210_PCF_GPIOHS21)>; /* dc */
> + };
> +
> + dvp_pinctrl: dvp-pinmux {
> + pinmux = <K210_FPIOA(9, K210_PCF_SCCB_SCLK)>,
> + <K210_FPIOA(10, K210_PCF_SCCB_SDA)>,
> + <K210_FPIOA(11, K210_PCF_DVP_RST)>,
> + <K210_FPIOA(12, K210_PCF_DVP_VSYNC)>,
> + <K210_FPIOA(13, K210_PCF_DVP_PWDN)>,
> + <K210_FPIOA(14, K210_PCF_DVP_XCLK)>,
> + <K210_FPIOA(15, K210_PCF_DVP_PCLK)>,
> + <K210_FPIOA(17, K210_PCF_DVP_HSYNC)>;
> + };
> +
> + gpiohs_pinctrl: gpiohs-pinmux {
> + pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,
> + <K210_FPIOA(20, K210_PCF_GPIOHS4)>, /* Rot. dip sw line 8 */
> + <K210_FPIOA(21, K210_PCF_GPIOHS5)>, /* Rot. dip sw line 4 */
> + <K210_FPIOA(22, K210_PCF_GPIOHS6)>, /* Rot. dip sw line 2 */
> + <K210_FPIOA(23, K210_PCF_GPIOHS7)>, /* Rot. dip sw line 1 */
> + <K210_FPIOA(24, K210_PCF_GPIOHS8)>,
> + <K210_FPIOA(25, K210_PCF_GPIOHS9)>,
> + <K210_FPIOA(26, K210_PCF_GPIOHS10)>;
> + };
> +
> + spi1_pinctrl: spi1-pinmux {
> + pinmux = <K210_FPIOA(29, K210_PCF_SPI1_SCLK)>,
> + <K210_FPIOA(30, K210_PCF_SPI1_D0)>,
> + <K210_FPIOA(31, K210_PCF_SPI1_D1)>,
> + <K210_FPIOA(32, K210_PCF_GPIOHS16)>; /* cs */
> + };
> +
> + i2s0_pinctrl: i2s0-pinmux {
> + pinmux = <K210_FPIOA(33, K210_PCF_I2S0_IN_D0)>,
> + <K210_FPIOA(34, K210_PCF_I2S0_WS)>,
> + <K210_FPIOA(35, K210_PCF_I2S0_SCLK)>;
> + };
> +};
> +
> +&uarths0 {
> + pinctrl-0 = <&uarths_pinctrl>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&gpio0 {
> + pinctrl-0 = <&gpiohs_pinctrl>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&i2s0 {
> + #sound-dai-cells = <1>;
> + pinctrl-0 = <&i2s0_pinctrl>;
> + pinctrl-names = "default";
> +};
> +
> +&dvp0 {
> + pinctrl-0 = <&dvp_pinctrl>;
> + pinctrl-names = "default";
> +};
> +
> +&spi0 {
> + pinctrl-0 = <&spi0_pinctrl>;
> + pinctrl-names = "default";
> + num-cs = <1>;
> + cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
> +
> + panel@0 {
> + compatible = "ilitek,ili9341";
> + reg = <0>;
> + dc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
> + spi-max-frequency = <15000000>;
> + status = "disabled";
> + };
> +};
> +
> +&spi1 {
> + pinctrl-0 = <&spi1_pinctrl>;
> + pinctrl-names = "default";
> + num-cs = <1>;
> + cs-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +
> + slot@0 {
> + compatible = "mmc-spi-slot";
> + reg = <0>;
> + voltage-ranges = <3300 3300>;
> + spi-max-frequency = <25000000>;
> + broken-cd;
> + };
> +};
> --
> 2.29.2
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Looks good to me.
Reviewed-by: Anup Patel <anup@xxxxxxxxxxxxxx>
Regards,
Anup
