Re: [PATCH v2 10/19] dt-bindings: dma: ti: Add document for K3 BCDMA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 17, 2020 at 12:56:47PM +0200, Peter Ujfalusi wrote:
> New binding document for
> Texas Instruments K3 Block Copy DMA (BCDMA).
> 
> BCDMA is introduced as part of AM64.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> ---
>  .../devicetree/bindings/dma/ti/k3-bcdma.yaml  | 175 ++++++++++++++++++
>  1 file changed, 175 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
> 
> diff --git a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
> new file mode 100644
> index 000000000000..c6d76641ebec
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
> @@ -0,0 +1,175 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/dma/ti/k3-bcdma.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments K3 DMSS BCDMA Device Tree Bindings
> +
> +maintainers:
> +  - Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> +
> +description: |
> +  The Block Copy DMA (BCDMA) is intended to perform similar functions as the TR
> +  mode channels of K3 UDMA-P.
> +  BCDMA includes block copy channels and Split channels.
> +
> +  Block copy channels mainly used for memory to memory transfers, but with
> +  optional triggers a block copy channel can service peripherals by accessing
> +  directly to memory mapped registers or area.
> +
> +  Split channels can be used to service PSI-L based peripherals.
> +  The peripherals can be PSI-L native or legacy, non PSI-L native peripherals
> +  with PDMAs. PDMA is tasked to act as a bridge between the PSI-L fabric and the
> +  legacy peripheral.
> +
> +  PDMAs can be configured via BCDMA split channel's peer registers to match with
> +  the configuration of the legacy peripheral.
> +
> +allOf:
> +  - $ref: /schemas/dma/dma-controller.yaml#
> +
> +properties:
> +  "#dma-cells":
> +    const: 3
> +    description: |
> +      cell 1: type of the BCDMA channel to be used to service the peripheral:
> +        0 - split channel
> +        1 - block copy channel using global trigger 1
> +        2 - block copy channel using global trigger 2
> +        3 - block copy channel using local trigger
> +
> +      cell 2: parameter for the channel:
> +        if cell 1 is 0 (split channel):
> +          PSI-L thread ID of the remote (to BCDMA) end.
> +          Valid ranges for thread ID depends on the data movement direction:
> +          for source thread IDs (rx): 0 - 0x7fff
> +          for destination thread IDs (tx): 0x8000 - 0xffff
> +
> +          Please refer to the device documentation for the PSI-L thread map and
> +          also the PSI-L peripheral chapter for the correct thread ID.
> +        if cell 1 is 1 or 2 (block copy channel using global trigger):
> +          Unused, ignored
> +
> +          The trigger must be configured for the channel externally to BCDMA,
> +          channels using global triggers should not be requested directly, but
> +          via DMA event router.
> +        if cell 1 is 3 (block copy channel using local trigger):
> +          bchan number of the locally triggered channel
> +
> +      cell 3: ASEL value for the channel
> +
> +  compatible:
> +    enum:
> +      - ti,am64-dmss-bcdma

Typically, we put 'compatible' first.

> +  "#address-cells":
> +    const: 2
> +
> +  "#size-cells":
> +    const: 2

These apply to child nodes, but you don't have any.

> +
> +  reg:
> +    maxItems: 5
> +
> +  reg-names:
> +    items:
> +      - const: gcfg
> +      - const: bchanrt
> +      - const: rchanrt
> +      - const: tchanrt
> +      - const: ringrt
> +
> +  msi-parent: true
> +
> +  ti,asel:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: ASEL value for non slave channels
> +
> +  ti,sci-rm-range-bchan:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description: |
> +      Array of BCDMA block-copy channel resource subtypes for resource
> +      allocation for this host
> +    minItems: 1
> +    # Should be enough
> +    maxItems: 255
> +    items:
> +      maximum: 0x3f
> +
> +  ti,sci-rm-range-tchan:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description: |
> +      Array of BCDMA split tx channel resource subtypes for resource allocation
> +      for this host
> +    minItems: 1
> +    # Should be enough
> +    maxItems: 255
> +    items:
> +      maximum: 0x3f
> +
> +  ti,sci-rm-range-rchan:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description: |
> +      Array of BCDMA split rx channel resource subtypes for resource allocation
> +      for this host
> +    minItems: 1
> +    # Should be enough
> +    maxItems: 255
> +    items:
> +      maximum: 0x3f
> +
> +required:
> +  - compatible
> +  - "#address-cells"
> +  - "#size-cells"
> +  - "#dma-cells"
> +  - reg
> +  - reg-names
> +  - msi-parent
> +  - ti,sci
> +  - ti,sci-dev-id
> +  - ti,sci-rm-range-bchan
> +  - ti,sci-rm-range-tchan
> +  - ti,sci-rm-range-rchan
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |+
> +    cbass_main {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        main_dmss {
> +            compatible = "simple-mfd";
> +            #address-cells = <2>;
> +            #size-cells = <2>;
> +            dma-ranges;
> +            ranges;
> +
> +            ti,sci-dev-id = <25>;
> +
> +            main_bcdma: dma-controller@485c0100 {
> +                compatible = "ti,am64-dmss-bcdma";
> +                #address-cells = <2>;
> +                #size-cells = <2>;
> +
> +                reg = <0x0 0x485c0100 0x0 0x100>,
> +                      <0x0 0x4c000000 0x0 0x20000>,
> +                      <0x0 0x4a820000 0x0 0x20000>,
> +                      <0x0 0x4aa40000 0x0 0x20000>,
> +                      <0x0 0x4bc00000 0x0 0x100000>;
> +                reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
> +                msi-parent = <&inta_main_dmss>;
> +                #dma-cells = <3>;
> +
> +                ti,sci = <&dmsc>;
> +                ti,sci-dev-id = <26>;
> +
> +                ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
> +                ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
> +                ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
> +            };
> +        };
> +    };
> -- 
> Peter
> 
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux