New binding document for Texas Instruments K3 Block Copy DMA (BCDMA). BCDMA is introduced as part of AM64. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx> --- .../devicetree/bindings/dma/ti/k3-bcdma.yaml | 175 ++++++++++++++++++ 1 file changed, 175 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml diff --git a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml new file mode 100644 index 000000000000..c6d76641ebec --- /dev/null +++ b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml @@ -0,0 +1,175 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/ti/k3-bcdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 DMSS BCDMA Device Tree Bindings + +maintainers: + - Peter Ujfalusi <peter.ujfalusi@xxxxxx> + +description: | + The Block Copy DMA (BCDMA) is intended to perform similar functions as the TR + mode channels of K3 UDMA-P. + BCDMA includes block copy channels and Split channels. + + Block copy channels mainly used for memory to memory transfers, but with + optional triggers a block copy channel can service peripherals by accessing + directly to memory mapped registers or area. + + Split channels can be used to service PSI-L based peripherals. + The peripherals can be PSI-L native or legacy, non PSI-L native peripherals + with PDMAs. PDMA is tasked to act as a bridge between the PSI-L fabric and the + legacy peripheral. + + PDMAs can be configured via BCDMA split channel's peer registers to match with + the configuration of the legacy peripheral. + +allOf: + - $ref: /schemas/dma/dma-controller.yaml# + +properties: + "#dma-cells": + const: 3 + description: | + cell 1: type of the BCDMA channel to be used to service the peripheral: + 0 - split channel + 1 - block copy channel using global trigger 1 + 2 - block copy channel using global trigger 2 + 3 - block copy channel using local trigger + + cell 2: parameter for the channel: + if cell 1 is 0 (split channel): + PSI-L thread ID of the remote (to BCDMA) end. + Valid ranges for thread ID depends on the data movement direction: + for source thread IDs (rx): 0 - 0x7fff + for destination thread IDs (tx): 0x8000 - 0xffff + + Please refer to the device documentation for the PSI-L thread map and + also the PSI-L peripheral chapter for the correct thread ID. + if cell 1 is 1 or 2 (block copy channel using global trigger): + Unused, ignored + + The trigger must be configured for the channel externally to BCDMA, + channels using global triggers should not be requested directly, but + via DMA event router. + if cell 1 is 3 (block copy channel using local trigger): + bchan number of the locally triggered channel + + cell 3: ASEL value for the channel + + compatible: + enum: + - ti,am64-dmss-bcdma + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + reg: + maxItems: 5 + + reg-names: + items: + - const: gcfg + - const: bchanrt + - const: rchanrt + - const: tchanrt + - const: ringrt + + msi-parent: true + + ti,asel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: ASEL value for non slave channels + + ti,sci-rm-range-bchan: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + Array of BCDMA block-copy channel resource subtypes for resource + allocation for this host + minItems: 1 + # Should be enough + maxItems: 255 + items: + maximum: 0x3f + + ti,sci-rm-range-tchan: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + Array of BCDMA split tx channel resource subtypes for resource allocation + for this host + minItems: 1 + # Should be enough + maxItems: 255 + items: + maximum: 0x3f + + ti,sci-rm-range-rchan: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + Array of BCDMA split rx channel resource subtypes for resource allocation + for this host + minItems: 1 + # Should be enough + maxItems: 255 + items: + maximum: 0x3f + +required: + - compatible + - "#address-cells" + - "#size-cells" + - "#dma-cells" + - reg + - reg-names + - msi-parent + - ti,sci + - ti,sci-dev-id + - ti,sci-rm-range-bchan + - ti,sci-rm-range-tchan + - ti,sci-rm-range-rchan + +unevaluatedProperties: false + +examples: + - |+ + cbass_main { + #address-cells = <2>; + #size-cells = <2>; + + main_dmss { + compatible = "simple-mfd"; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges; + ranges; + + ti,sci-dev-id = <25>; + + main_bcdma: dma-controller@485c0100 { + compatible = "ti,am64-dmss-bcdma"; + #address-cells = <2>; + #size-cells = <2>; + + reg = <0x0 0x485c0100 0x0 0x100>, + <0x0 0x4c000000 0x0 0x20000>, + <0x0 0x4a820000 0x0 0x20000>, + <0x0 0x4aa40000 0x0 0x20000>, + <0x0 0x4bc00000 0x0 0x100000>; + reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt"; + msi-parent = <&inta_main_dmss>; + #dma-cells = <3>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <26>; + + ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */ + ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */ + ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */ + }; + }; + }; -- Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
