On Tue, Nov 17, 2020 at 01:18:10PM +0100, Linus Walleij wrote: > This adds device tree bindings for the Yamaha YAS5xx > magnetometers/compass sensors. > > Cc: devicetree@xxxxxxxxxxxxxxx > Cc: phone-devel@xxxxxxxxxxxxxxx > Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> > --- > ChangeLog v1->v2: > - Add Yamaha to the vendor list, I was surprised to find > they were not yet listed. > > I am still working on the actual driver for the magnetometer > but why not send out the DT bindings for review, the > hardware variants are easy to describe. This makes it possibe > for people to include these magnetometers in device > trees. > --- > .../bindings/iio/magnetometer/yamaha,yas.yaml | 80 +++++++++++++++++++ > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > 2 files changed, 82 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas.yaml > > diff --git a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas.yaml b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas.yaml > new file mode 100644 > index 000000000000..6fc4cfe4a417 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas.yaml > @@ -0,0 +1,80 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/magnetometer/yamaha,yas.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Yamaha YAS5xx magnetometer sensors > + > +maintainers: > + - Linus Walleij <linus.walleij@xxxxxxxxxx> > + > +description: > + The Yamaha YAS5xx magnetometers is a line of 3-axis magnetometers > + first introduced by Yamaha in 2006 with the YAS529. Over the years > + this magnetometer has been minatyrized and appeared in a number of > + different variants. > + > +properties: > + compatible: > + oneOf: > + - enum: Don't need oneOf when there's only 1 entry. > + - yamaha,yas529 > + - yamaha,yas530 > + - yamaha,yas532 > + - yamaha,yas533 > + - yamaha,yas535 > + - yamaha,yas536 > + - yamaha,yas537 > + - yamaha,yas539 > + > + reg: > + maxItems: 1 > + > + reset-gpios: > + maxItems: 1 > + description: The YAS5xx sensors has a RSTN pin used to reset > + the logic inside the sensor. This GPIO line should connect > + to that pin and be marked as GPIO_ACTIVE_LOW. > + > + interrupts: > + maxItems: 1 > + description: Interrupt for INT pin for variants that support > + interrupt generation. This polarity, whether the interrupt > + is active on the rising or the falling edge, is configurable > + in the hardware. > + > + vdd-supply: > + description: An optional regulator providing core power supply > + on the VDD pin, typically 1.8 V or 3.0 V. > + > + iovdd-supply: > + description: An optional regulator providing I/O power supply > + for the I2C interface on the IOVDD pin, typically 1.8 V. > + This is not present on all variants of the component, some > + have only the VDD voltage. > + > + mount-matrix: > + description: An optional 3x3 mounting rotation matrix. > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + magnetometer@2e { > + compatible = "yamaha,yas530"; > + reg = <0x2e>; > + vdd-supply = <&ldo1_reg>; > + iovdd-supply = <&ldo2_reg>; > + reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; > + }; > + }; > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml > index 2735be1a8470..0340674c72bd 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml > +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml > @@ -1210,6 +1210,8 @@ patternProperties: > description: Shenzhen Xunlong Software CO.,Limited > "^xylon,.*": > description: Xylon > + "^yamaha,.*": > + description: Yamaha Corporation > "^ylm,.*": > description: Shenzhen Yangliming Electronic Technology Co., Ltd. > "^yna,.*": > -- > 2.26.2 >
