Following a change to the SPI framework, providing a value of zero for 'spi-rx-bus-width' and 'spi-tx-bus-width' is now possible and will essentially mean that no RX or TX is allowed. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> --- Changelog v3 -> v4: * https://lore.kernel.org/linux-spi/20201127130834.136348-3-alexandru.ardelean@xxxxxxxxxx/ * fix typos Documentation/devicetree/bindings/spi/spi-controller.yaml | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 1b56d5e40f1f..cf663e4a4afe 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -125,8 +125,9 @@ patternProperties: spi-rx-bus-width: description: Bus width to the SPI bus used for read transfers. + If 0 is provided, then no RX will be possible on this device. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 4, 8] + enum: [0, 1, 2, 4, 8] default: 1 spi-rx-delay-us: @@ -136,8 +137,9 @@ patternProperties: spi-tx-bus-width: description: Bus width to the SPI bus used for write transfers. + If 0 is provided, then no TX will be possible on this device. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 4, 8] + enum: [0, 1, 2, 4, 8] default: 1 spi-tx-delay-us: -- 2.17.1