This change moves all the SPI mode bits into a separate 'spi.h' header in uAPI. This is meant to re-use these definitions inside the kernel as well as export them to userspace (via uAPI). The SPI mode definitions have usually been duplicated between between 'include/linux/spi/spi.h' and 'include/uapi/linux/spi/spidev.h', so whenever adding a new entry, this would need to be put in both headers. They've been moved from 'include/linux/spi/spi.h', since that seems a bit more complete; the bits have descriptions and there is the SPI_MODE_X_MASK. This change also does a conversion of these bitfields to _BITUL() macro. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> --- Changelog v3 -> v4: * https://lore.kernel.org/linux-spi/20201127130834.136348-1-alexandru.ardelean@xxxxxxxxxx/ * uapi -> uAPI in comment * removed extra license text in 'uapi/linux/spi/spi.h' * using _BITUL() macro include/linux/spi/spi.h | 23 ++--------------------- include/uapi/linux/spi/spi.h | 31 +++++++++++++++++++++++++++++++ include/uapi/linux/spi/spidev.h | 30 +----------------------------- 3 files changed, 34 insertions(+), 50 deletions(-) create mode 100644 include/uapi/linux/spi/spi.h diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index aa09fdc8042d..a08c3f37e202 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -15,6 +15,8 @@ #include <linux/gpio/consumer.h> #include <linux/ptp_clock_kernel.h> +#include <uapi/linux/spi/spi.h> + struct dma_chan; struct property_entry; struct spi_controller; @@ -165,27 +167,6 @@ struct spi_device { u8 bits_per_word; bool rt; u32 mode; -#define SPI_CPHA 0x01 /* clock phase */ -#define SPI_CPOL 0x02 /* clock polarity */ -#define SPI_MODE_0 (0|0) /* (original MicroWire) */ -#define SPI_MODE_1 (0|SPI_CPHA) -#define SPI_MODE_2 (SPI_CPOL|0) -#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA) -#define SPI_MODE_X_MASK (SPI_CPOL|SPI_CPHA) -#define SPI_CS_HIGH 0x04 /* chipselect active high? */ -#define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */ -#define SPI_3WIRE 0x10 /* SI/SO signals shared */ -#define SPI_LOOP 0x20 /* loopback mode */ -#define SPI_NO_CS 0x40 /* 1 dev/bus, no chipselect */ -#define SPI_READY 0x80 /* slave pulls low to pause */ -#define SPI_TX_DUAL 0x100 /* transmit with 2 wires */ -#define SPI_TX_QUAD 0x200 /* transmit with 4 wires */ -#define SPI_RX_DUAL 0x400 /* receive with 2 wires */ -#define SPI_RX_QUAD 0x800 /* receive with 4 wires */ -#define SPI_CS_WORD 0x1000 /* toggle cs after each word */ -#define SPI_TX_OCTAL 0x2000 /* transmit with 8 wires */ -#define SPI_RX_OCTAL 0x4000 /* receive with 8 wires */ -#define SPI_3WIRE_HIZ 0x8000 /* high impedance turnaround */ int irq; void *controller_state; void *controller_data; diff --git a/include/uapi/linux/spi/spi.h b/include/uapi/linux/spi/spi.h new file mode 100644 index 000000000000..703b586f35df --- /dev/null +++ b/include/uapi/linux/spi/spi.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +#ifndef _UAPI_SPI_H +#define _UAPI_SPI_H + +#include <linux/const.h> + +#define SPI_CPHA _BITUL(0) /* clock phase */ +#define SPI_CPOL _BITUL(1) /* clock polarity */ + +#define SPI_MODE_0 (0|0) /* (original MicroWire) */ +#define SPI_MODE_1 (0|SPI_CPHA) +#define SPI_MODE_2 (SPI_CPOL|0) +#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA) +#define SPI_MODE_X_MASK (SPI_CPOL|SPI_CPHA) + +#define SPI_CS_HIGH _BITUL(2) /* chipselect active high? */ +#define SPI_LSB_FIRST _BITUL(3) /* per-word bits-on-wire */ +#define SPI_3WIRE _BITUL(4) /* SI/SO signals shared */ +#define SPI_LOOP _BITUL(5) /* loopback mode */ +#define SPI_NO_CS _BITUL(6) /* 1 dev/bus, no chipselect */ +#define SPI_READY _BITUL(7) /* slave pulls low to pause */ +#define SPI_TX_DUAL _BITUL(8) /* transmit with 2 wires */ +#define SPI_TX_QUAD _BITUL(9) /* transmit with 4 wires */ +#define SPI_RX_DUAL _BITUL(10) /* receive with 2 wires */ +#define SPI_RX_QUAD _BITUL(11) /* receive with 4 wires */ +#define SPI_CS_WORD _BITUL(12) /* toggle cs after each word */ +#define SPI_TX_OCTAL _BITUL(13) /* transmit with 8 wires */ +#define SPI_RX_OCTAL _BITUL(14) /* receive with 8 wires */ +#define SPI_3WIRE_HIZ _BITUL(15) /* high impedance turnaround */ + +#endif /* _UAPI_SPI_H */ diff --git a/include/uapi/linux/spi/spidev.h b/include/uapi/linux/spi/spidev.h index d56427c0b3e0..0c3da08f2aff 100644 --- a/include/uapi/linux/spi/spidev.h +++ b/include/uapi/linux/spi/spidev.h @@ -25,35 +25,7 @@ #include <linux/types.h> #include <linux/ioctl.h> - -/* User space versions of kernel symbols for SPI clocking modes, - * matching <linux/spi/spi.h> - */ - -#define SPI_CPHA 0x01 -#define SPI_CPOL 0x02 - -#define SPI_MODE_0 (0|0) -#define SPI_MODE_1 (0|SPI_CPHA) -#define SPI_MODE_2 (SPI_CPOL|0) -#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA) - -#define SPI_CS_HIGH 0x04 -#define SPI_LSB_FIRST 0x08 -#define SPI_3WIRE 0x10 -#define SPI_LOOP 0x20 -#define SPI_NO_CS 0x40 -#define SPI_READY 0x80 -#define SPI_TX_DUAL 0x100 -#define SPI_TX_QUAD 0x200 -#define SPI_RX_DUAL 0x400 -#define SPI_RX_QUAD 0x800 -#define SPI_CS_WORD 0x1000 -#define SPI_TX_OCTAL 0x2000 -#define SPI_RX_OCTAL 0x4000 -#define SPI_3WIRE_HIZ 0x8000 - -/*---------------------------------------------------------------------------*/ +#include <linux/spi/spi.h> /* IOCTL commands */ -- 2.17.1
