IMX SCU based platforms (e.g. MX8QM/MX8QXP) are comprised of a number of SS
(Subsystems), those SS may be shared between different SoCs while most of them
can be reused like Devices Resources, Clocks, Power domains and etc.
This patch series aims to improve the MX8 architecture to comply with the HW
design to save a lot of duplicated codes and benefits us a better
maintainability and scalability in the future.
ChangeLog:
v4-resend:
* no change except put three module binding patches first which are used
by this patchset.
v3->v4:
* mainly rebase to latest kernel except a few very minor changes like change to use
new scu protocol binding which was not supported in last version
v2->v3:
* use clock-indices property instead of bit-offset property suggested by Shawn Guo
* rebase to latest shawn/for-next
v1->v2:
* change to the new two cells scu clock binding, so original adding scu clocks
patches were removed.
* Move scu pd node above clk node
Dong Aisheng (18):
dt-bindings: mmc: imx: fix the wrongly dropped imx8qm compatible
string
dt-bindings: arm: fsl: add imx8qm boards compatible string
dt-bindings: mailbox: mu: add imx8qm support
arm64: dts: imx8qxp: add fallback compatible string for scu pd
arm64: dts: imx8qxp: move scu pd node before scu clock node
arm64: dts: imx8qxp: orginize dts in subsystems
arm64: dts: imx8: add lsio lpcg clocks
arm64: dts: imx8: add conn lpcg clocks
arm64: dts: imx8: add adma lpcg clocks
arm64: dts: imx8: switch to two cell scu clock binding
arm64: dts: imx8: switch to new lpcg clock binding
arm64: dts: imx8qm: add lsio ss support
arm64: dts: imx8qm: add conn ss support
arm64: dts: imx8: split adma ss into dma and audio ss
arm64: dts: imx8qm: add dma ss support
arm64: dts: imx: add imx8qm common dts file
arm64: dts: imx: add imx8qm mek support
arm64: defconfig: add imx8qm mek support
.../devicetree/bindings/arm/fsl.yaml | 6 +
.../devicetree/bindings/mailbox/fsl,mu.yaml | 5 +-
.../bindings/mmc/fsl-imx-esdhc.yaml | 1 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../boot/dts/freescale/imx8-ss-adma.dtsi | 8 +
.../boot/dts/freescale/imx8-ss-audio.dtsi | 68 +++
.../boot/dts/freescale/imx8-ss-conn.dtsi | 184 ++++++++
.../arm64/boot/dts/freescale/imx8-ss-ddr.dtsi | 18 +
.../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 202 +++++++++
.../boot/dts/freescale/imx8-ss-lsio.dtsi | 311 +++++++++++++
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 144 ++++++
.../boot/dts/freescale/imx8qm-ss-conn.dtsi | 21 +
.../boot/dts/freescale/imx8qm-ss-dma.dtsi | 51 +++
.../boot/dts/freescale/imx8qm-ss-lsio.dtsi | 61 +++
arch/arm64/boot/dts/freescale/imx8qm.dtsi | 176 ++++++++
.../boot/dts/freescale/imx8qxp-ai_ml.dts | 20 +-
.../freescale/imx8qxp-colibri-eval-v3.dtsi | 8 +-
.../boot/dts/freescale/imx8qxp-colibri.dtsi | 12 +-
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 50 +--
.../boot/dts/freescale/imx8qxp-ss-adma.dtsi | 37 ++
.../boot/dts/freescale/imx8qxp-ss-conn.dtsi | 25 ++
.../boot/dts/freescale/imx8qxp-ss-lsio.dtsi | 61 +++
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 423 ++----------------
arch/arm64/configs/defconfig | 1 +
24 files changed, 1455 insertions(+), 439 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-mek.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
--
2.23.0
