RE: [PATCH RESEND v4 00/18] arm64: dts: imx8: architecture improvement and adding imx8qm support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Shawn,

Could you please help take a look at this patch series? It's been without comments for months.
Please let me know if you want me to resend now or I can resend later with new comments addressed if any.

Regards
Aisheng

> From: Aisheng Dong <aisheng.dong@xxxxxxx>
> Sent: Thursday, November 26, 2020 6:59 PM
> 
> IMX SCU based platforms (e.g. MX8QM/MX8QXP) are comprised of a number
> of SS (Subsystems), those SS may be shared between different SoCs while most
> of them can be reused like Devices Resources, Clocks, Power domains and etc.
> 
> This patch series aims to improve the MX8 architecture to comply with the HW
> design to save a lot of duplicated codes and benefits us a better
> maintainability and scalability in the future.
> 
> ChangeLog:
> v4-resend:
>  * no change except put three module binding patches first which are used
>    by this patchset.
> v3->v4:
>  * mainly rebase to latest kernel except a few very minor changes like change
> to use
>    new scu protocol binding which was not supported in last version
> v2->v3:
>  * use clock-indices property instead of bit-offset property suggested by
> Shawn Guo
>  * rebase to latest shawn/for-next
> v1->v2:
>  * change to the new two cells scu clock binding, so original adding scu clocks
>    patches were removed.
>  * Move scu pd node above clk node
> 
> 
> Dong Aisheng (18):
>   dt-bindings: mmc: imx: fix the wrongly dropped imx8qm compatible
>     string
>   dt-bindings: arm: fsl: add imx8qm boards compatible string
>   dt-bindings: mailbox: mu: add imx8qm support
>   arm64: dts: imx8qxp: add fallback compatible string for scu pd
>   arm64: dts: imx8qxp: move scu pd node before scu clock node
>   arm64: dts: imx8qxp: orginize dts in subsystems
>   arm64: dts: imx8: add lsio lpcg clocks
>   arm64: dts: imx8: add conn lpcg clocks
>   arm64: dts: imx8: add adma lpcg clocks
>   arm64: dts: imx8: switch to two cell scu clock binding
>   arm64: dts: imx8: switch to new lpcg clock binding
>   arm64: dts: imx8qm: add lsio ss support
>   arm64: dts: imx8qm: add conn ss support
>   arm64: dts: imx8: split adma ss into dma and audio ss
>   arm64: dts: imx8qm: add dma ss support
>   arm64: dts: imx: add imx8qm common dts file
>   arm64: dts: imx: add imx8qm mek support
>   arm64: defconfig: add imx8qm mek support
> 
>  .../devicetree/bindings/arm/fsl.yaml          |   6 +
>  .../devicetree/bindings/mailbox/fsl,mu.yaml   |   5 +-
>  .../bindings/mmc/fsl-imx-esdhc.yaml           |   1 +
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  .../boot/dts/freescale/imx8-ss-adma.dtsi      |   8 +
>  .../boot/dts/freescale/imx8-ss-audio.dtsi     |  68 +++
>  .../boot/dts/freescale/imx8-ss-conn.dtsi      | 184 ++++++++
>  .../arm64/boot/dts/freescale/imx8-ss-ddr.dtsi |  18
> +  .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 202 +++++++++
>  .../boot/dts/freescale/imx8-ss-lsio.dtsi      | 311 +++++++++++++
>  arch/arm64/boot/dts/freescale/imx8qm-mek.dts  | 144 ++++++
>  .../boot/dts/freescale/imx8qm-ss-conn.dtsi    |  21 +
>  .../boot/dts/freescale/imx8qm-ss-dma.dtsi     |  51 +++
>  .../boot/dts/freescale/imx8qm-ss-lsio.dtsi    |  61 +++
>  arch/arm64/boot/dts/freescale/imx8qm.dtsi     | 176 ++++++++
>  .../boot/dts/freescale/imx8qxp-ai_ml.dts      |  20 +-
>  .../freescale/imx8qxp-colibri-eval-v3.dtsi    |   8 +-
>  .../boot/dts/freescale/imx8qxp-colibri.dtsi   |  12 +-
>  arch/arm64/boot/dts/freescale/imx8qxp-mek.dts |  50 +--
>  .../boot/dts/freescale/imx8qxp-ss-adma.dtsi   |  37 ++
>  .../boot/dts/freescale/imx8qxp-ss-conn.dtsi   |  25 ++
>  .../boot/dts/freescale/imx8qxp-ss-lsio.dtsi   |  61 +++
>  arch/arm64/boot/dts/freescale/imx8qxp.dtsi    | 423 ++----------------
>  arch/arm64/configs/defconfig                  |   1 +
>  24 files changed, 1455 insertions(+), 439 deletions(-)  create mode 100644
> arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-mek.dts
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qm.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
> 
> --
> 2.23.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux