Re: [PATCH v5 5/5] PCI: qcom: Add support for configuring BDF to SID mapping for SM8250

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue 27 Oct 12:00 CDT 2020, Manivannan Sadhasivam wrote:

> For SM8250, we need to write the BDF to SID mapping in PCIe controller
> register space for proper working. This is accomplished by extracting
> the BDF and SID values from "iommu-map" property in DT and writing those
> in the register address calculated from the hash value of BDF. In case
> of collisions, the index of the next entry will also be written.
> 
> For the sake of it, let's introduce a "config_sid" callback and do it
> conditionally for SM8250.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> ---
> 
> Rob: I've dropped your review tag as this patch has gone through some
> change (mostly cleanups though)
> 
>  drivers/pci/controller/dwc/Kconfig     |  1 +
>  drivers/pci/controller/dwc/pcie-qcom.c | 81 ++++++++++++++++++++++++++
>  2 files changed, 82 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index bc049865f8e0..875ebc6e8884 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -169,6 +169,7 @@ config PCIE_QCOM
>  	depends on OF && (ARCH_QCOM || COMPILE_TEST)
>  	depends on PCI_MSI_IRQ_DOMAIN
>  	select PCIE_DW_HOST
> +	select CRC8
>  	help
>  	  Say Y here to enable PCIe controller support on Qualcomm SoCs. The
>  	  PCIe controller uses the DesignWare core plus Qualcomm-specific
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 0b180a19b0ea..2148fcf74294 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -9,6 +9,7 @@
>   */
>  
>  #include <linux/clk.h>
> +#include <linux/crc8.h>
>  #include <linux/delay.h>
>  #include <linux/gpio/consumer.h>
>  #include <linux/interrupt.h>
> @@ -57,6 +58,7 @@
>  #define PCIE20_PARF_SID_OFFSET			0x234
>  #define PCIE20_PARF_BDF_TRANSLATE_CFG		0x24C
>  #define PCIE20_PARF_DEVICE_TYPE			0x1000
> +#define PCIE20_PARF_BDF_TO_SID_TABLE_N		0x2000
>  
>  #define PCIE20_ELBI_SYS_CTRL			0x04
>  #define PCIE20_ELBI_SYS_CTRL_LT_ENABLE		BIT(0)
> @@ -97,6 +99,9 @@
>  
>  #define QCOM_PCIE_2_1_0_MAX_SUPPLY	3
>  #define QCOM_PCIE_2_1_0_MAX_CLOCKS	5
> +
> +#define QCOM_PCIE_CRC8_POLYNOMIAL (BIT(2) | BIT(1) | BIT(0))
> +
>  struct qcom_pcie_resources_2_1_0 {
>  	struct clk_bulk_data clks[QCOM_PCIE_2_1_0_MAX_CLOCKS];
>  	struct reset_control *pci_reset;
> @@ -179,6 +184,7 @@ struct qcom_pcie_ops {
>  	void (*deinit)(struct qcom_pcie *pcie);
>  	void (*post_deinit)(struct qcom_pcie *pcie);
>  	void (*ltssm_enable)(struct qcom_pcie *pcie);
> +	int (*config_sid)(struct qcom_pcie *pcie);
>  };
>  
>  struct qcom_pcie {
> @@ -1261,6 +1267,74 @@ static int qcom_pcie_link_up(struct dw_pcie *pci)
>  	return !!(val & PCI_EXP_LNKSTA_DLLLA);
>  }
>  
> +static int qcom_pcie_config_sid_sm8250(struct qcom_pcie *pcie)
> +{
> +	/* iommu map structure */
> +	struct {
> +		u32 bdf;
> +		u32 phandle;
> +		u32 smmu_sid;
> +		u32 smmu_sid_len;
> +	} *map;
> +	void __iomem *bdf_to_sid_base = pcie->parf + PCIE20_PARF_BDF_TO_SID_TABLE_N;
> +	struct device *dev = pcie->pci->dev;
> +	u8 qcom_pcie_crc8_table[CRC8_TABLE_SIZE];
> +	int i, nr_map, size = 0;
> +	u32 smmu_sid_base;
> +
> +	of_get_property(dev->of_node, "iommu-map", &size);
> +	if (!size)
> +		return 0;
> +
> +	map = kzalloc(size, GFP_KERNEL);
> +	if (!map)
> +		return -ENOMEM;
> +
> +	of_property_read_u32_array(dev->of_node,
> +		"iommu-map", (u32 *)map, size / sizeof(u32));
> +
> +	nr_map = size / (sizeof(*map));
> +
> +	crc8_populate_msb(qcom_pcie_crc8_table, QCOM_PCIE_CRC8_POLYNOMIAL);
> +
> +	/* Registers need to be zero out first */
> +	memset_io(bdf_to_sid_base, 0, CRC8_TABLE_SIZE * sizeof(u32));
> +
> +	/* Look for an available entry to hold the mapping */
> +	for (i = 0; i < nr_map; i++) {
> +		u16 bdf_be = cpu_to_be16(map[i].bdf);
> +		u32 val;
> +		u8 hash;
> +
> +		hash = crc8(qcom_pcie_crc8_table, (u8 *)&bdf_be, sizeof(bdf_be),
> +			0);
> +
> +		val = readl(bdf_to_sid_base + hash * sizeof(u32));
> +
> +		/* If the register is already populated, look for next available entry */
> +		while (val) {
> +			u8 current_hash = hash++;
> +			u8 next_mask = 0xff;
> +
> +			/* If NEXT field is NULL then update it with next hash */
> +			if (!(val & next_mask)) {
> +				val |= (u32)hash;
> +				writel(val, bdf_to_sid_base + current_hash * sizeof(u32));
> +			}
> +
> +			val = readl(bdf_to_sid_base + hash * sizeof(u32));
> +		}
> +
> +		/* BDF [31:16] | SID [15:8] | NEXT [7:0] */
> +		val = map[i].bdf << 16 | (map[i].smmu_sid - smmu_sid_base) << 8 | 0;
> +		writel(val, bdf_to_sid_base + hash * sizeof(u32));
> +	}
> +
> +	kfree(map);
> +
> +	return 0;
> +}
> +
>  static int qcom_pcie_host_init(struct pcie_port *pp)
>  {
>  	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> @@ -1292,6 +1366,12 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
>  	if (ret)
>  		goto err;
>  
> +	if (pcie->ops->config_sid) {
> +		ret = pcie->ops->config_sid(pcie);
> +		if (ret)
> +			goto err;
> +	}
> +
>  	return 0;
>  err:
>  	qcom_ep_reset_assert(pcie);
> @@ -1369,6 +1449,7 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
>  	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
>  	.post_init = qcom_pcie_post_init_2_7_0,
>  	.post_deinit = qcom_pcie_post_deinit_2_7_0,
> +	.config_sid = qcom_pcie_config_sid_sm8250,
>  };
>  
>  static const struct dw_pcie_ops dw_pcie_ops = {
> -- 
> 2.17.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux