Document the PCIe DT bindings for SM8250 SoC. The PCIe IP is similar to the one used on SDM845, hence just add the compatible along with the optional "atu" register region. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> --- Documentation/devicetree/bindings/pci/qcom,pcie.txt | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt index 02bc81bb8b2d..3b55310390a0 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt @@ -13,6 +13,7 @@ - "qcom,pcie-ipq8074" for ipq8074 - "qcom,pcie-qcs404" for qcs404 - "qcom,pcie-sdm845" for sdm845 + - "qcom,pcie-sm8250" for sm8250 - reg: Usage: required @@ -27,6 +28,7 @@ - "dbi" DesignWare PCIe registers - "elbi" External local bus interface registers - "config" PCIe configuration space + - "atu" ATU address space (optional) - device_type: Usage: required @@ -131,7 +133,7 @@ - "slave_bus" AXI Slave clock -clock-names: - Usage: required for sdm845 + Usage: required for sdm845 and sm8250 Value type: <stringlist> Definition: Should contain the following entries - "aux" Auxiliary clock @@ -206,7 +208,7 @@ - "ahb" AHB reset - reset-names: - Usage: required for sdm845 + Usage: required for sdm845 and sm8250 Value type: <stringlist> Definition: Should contain the following entries - "pci" PCIe core reset -- 2.17.1
