Convert the STM32 USB PHY Controller (USBPHYC) bindings to DT schema format
using json-schema.
Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxx>
---
.../bindings/phy/phy-stm32-usbphyc.txt | 73 ----------
.../bindings/phy/phy-stm32-usbphyc.yaml | 136 ++++++++++++++++++
2 files changed, 136 insertions(+), 73 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt
create mode 100644 Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt
deleted file mode 100644
index 725ae71ae653..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-STMicroelectronics STM32 USB HS PHY controller
-
-The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI
-switch. It controls PHY configuration and status, and the UTMI+ switch that
-selects either OTG or HOST controller for the second PHY port. It also sets
-PLL configuration.
-
-USBPHYC
- |_ PLL
- |
- |_ PHY port#1 _________________ HOST controller
- | _ |
- | / 1|________________|
- |_ PHY port#2 ----| |________________
- | \_0| |
- |_ UTMI switch_______| OTG controller
-
-
-Phy provider node
-=================
-
-Required properties:
-- compatible: must be "st,stm32mp1-usbphyc"
-- reg: address and length of the usb phy control register set
-- clocks: phandle + clock specifier for the PLL phy clock
-- #address-cells: number of address cells for phys sub-nodes, must be <1>
-- #size-cells: number of size cells for phys sub-nodes, must be <0>
-
-Optional properties:
-- assigned-clocks: phandle + clock specifier for the PLL phy clock
-- assigned-clock-parents: the PLL phy clock parent
-- resets: phandle + reset specifier
-
-Required nodes: one sub-node per port the controller provides.
-
-Phy sub-nodes
-==============
-
-Required properties:
-- reg: phy port index
-- phy-supply: phandle to the regulator providing 3V3 power to the PHY,
- see phy-bindings.txt in the same directory.
-- vdda1v1-supply: phandle to the regulator providing 1V1 power to the PHY
-- vdda1v8-supply: phandle to the regulator providing 1V8 power to the PHY
-- #phy-cells: see phy-bindings.txt in the same directory, must be <0> for PHY
- port#1 and must be <1> for PHY port#2, to select USB controller
-
-
-Example:
- usbphyc: usb-phy@5a006000 {
- compatible = "st,stm32mp1-usbphyc";
- reg = <0x5a006000 0x1000>;
- clocks = <&rcc_clk USBPHY_K>;
- resets = <&rcc_rst USBPHY_R>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- usbphyc_port0: usb-phy@0 {
- reg = <0>;
- phy-supply = <&vdd_usb>;
- vdda1v1-supply = <®11>;
- vdda1v8-supply = <®18>
- #phy-cells = <0>;
- };
-
- usbphyc_port1: usb-phy@1 {
- reg = <1>;
- phy-supply = <&vdd_usb>;
- vdda1v1-supply = <®11>;
- vdda1v8-supply = <®18>
- #phy-cells = <1>;
- };
- };
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
new file mode 100644
index 000000000000..09064bbb68dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-stm32-usbphyc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 USB HS PHY controller binding
+
+description:
+
+ The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI
+ switch. It controls PHY configuration and status, and the UTMI+ switch that
+ selects either OTG or HOST controller for the second PHY port. It also sets
+ PLL configuration.
+
+ USBPHYC
+ |_ PLL
+ |
+ |_ PHY port#1 _________________ HOST controller
+ | __ |
+ | / 1|________________|
+ |_ PHY port#2 ----| |________________
+ | \_0| |
+ |_ UTMI switch_______| OTG controller
+
+maintainers:
+ - Amelie Delaunay <amelie.delaunay@xxxxxx>
+
+properties:
+ compatible:
+ const: st,stm32mp1-usbphyc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+#Required child nodes:
+
+patternProperties:
+ "^usb-phy@[0|1]$":
+ type: object
+ description:
+ Each port the controller provides must be represented as a sub-node.
+
+ properties:
+ reg:
+ description: phy port index.
+ maxItems: 1
+
+ phy-supply:
+ description: regulator providing 3V3 power supply to the PHY.
+
+ vdda1v1-supply:
+ description: regulator providing 1V1 power supply to the PLL block
+
+ vdda1v8-supply:
+ description: regulator providing 1V8 power supply to the PLL block
+
+ "#phy-cells":
+ enum: [ 0x0, 0x1 ]
+
+ allOf:
+ - if:
+ properties:
+ reg:
+ const: 0
+ then:
+ properties:
+ "#phy-cells":
+ const: 0
+ else:
+ properties:
+ "#phy-cells":
+ const: 1
+ description:
+ The value is used to select UTMI switch output.
+ 0 for OTG controller and 1 for Host controller.
+
+ required:
+ - reg
+ - phy-supply
+ - vdda1v1-supply
+ - vdda1v8-supply
+ - "#phy-cells"
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - "#address-cells"
+ - "#size-cells"
+ - usb-phy@0
+ - usb-phy@1
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ usbphyc: usbphyc@5a006000 {
+ compatible = "st,stm32mp1-usbphyc";
+ reg = <0x5a006000 0x1000>;
+ clocks = <&rcc USBPHY_K>;
+ resets = <&rcc USBPHY_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbphyc_port0: usb-phy@0 {
+ reg = <0>;
+ phy-supply = <&vdd_usb>;
+ vdda1v1-supply = <®11>;
+ vdda1v8-supply = <®18>;
+ #phy-cells = <0>;
+ };
+
+ usbphyc_port1: usb-phy@1 {
+ reg = <1>;
+ phy-supply = <&vdd_usb>;
+ vdda1v1-supply = <®11>;
+ vdda1v8-supply = <®18>;
+ #phy-cells = <1>;
+ };
+ };
+...
--
2.17.1
