Now that we have a pin controller, use that instead of manuplating the
mdio/mdc pins directly. i.e. we no longer require the mdio-mii-mux
Signed-off-by: Vivek Unune <npcomplete13@xxxxxxxxx>
---
.../boot/dts/bcm47094-linksys-panamera.dts | 26 +++----------------
1 file changed, 4 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 507af23e227f..3bb3fe5bfbf8 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -123,33 +123,13 @@ bluebar8 {
};
};
- mdio-bus-mux {
- #address-cells = <1>;
- #size-cells = <0>;
+ mdio-bus-mux@18003000 {
/* BIT(9) = 1 => external mdio */
- mdio_ext: mdio@200 {
+ mdio@200 {
reg = <0x200>;
#address-cells = <1>;
#size-cells = <0>;
- };
- };
-
- mdio-mii-mux {
- compatible = "mdio-mux-mmioreg";
- mdio-parent-bus = <&mdio_ext>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x1800c1c0 0x4>;
-
- /* BIT(6) = mdc, BIT(7) = mdio */
- mux-mask = <0xc0>;
-
- mdio-mii@0 {
- /* Enable MII function */
- reg = <0x0>;
- #address-cells = <1>;
- #size-cells = <0>;
switch@0 {
compatible = "brcm,bcm53125";
@@ -159,6 +139,8 @@ switch@0 {
reset-names = "robo_reset";
reg = <0>;
dsa,member = <1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_mdio>;
ports {
#address-cells = <1>;
--
2.25.1
