BCM47094 version of pinmux uses different driver and supports mdio
pinmux pins. Hence, use the correct driver and define the pins.
Signed-off-by: Vivek Unune <npcomplete13@xxxxxxxxx>
---
---
arch/arm/boot/dts/bcm47094.dtsi | 9 +++++++++
arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
index cdc5ff593adb..747ca030435f 100644
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -8,6 +8,15 @@
/ {
};
+&pinctrl {
+ compatible = "brcm,bcm4709-pinmux";
+
+ pinmux_mdio: mdio {
+ groups = "mdio_grp";
+ function = "mdio";
+ };
+};
+
&usb3_phy {
compatible = "brcm,ns-bx-usb3-phy";
};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 3e55ff4fb550..cfc08cdd590f 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -428,7 +428,7 @@ cru@100 {
#address-cells = <1>;
#size-cells = <1>;
- pin-controller@1c0 {
+ pinctrl: pin-controller@1c0 {
compatible = "brcm,bcm4708-pinmux";
reg = <0x1c0 0x24>;
reg-names = "cru_gpio_control";
--
2.25.1
