Re: [PATCH v5 8/9] arm64: dts: rockchip: add isp0 node for rk3399

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 14, 2020 at 6:27 PM Helen Koike <helen.koike@xxxxxxxxxxxxx> wrote:
>
> Hi Tomasz,
>
> On 9/26/20 10:00 AM, Tomasz Figa wrote:
> > Hi Helen,
> >
> > On Wed, Jul 22, 2020 at 12:55:32PM -0300, Helen Koike wrote:
> >> From: Shunqian Zheng <zhengsq@xxxxxxxxxxxxxx>
> >>
> >> RK3399 has two ISPs, but only isp0 was tested.
> >> Add isp0 node in rk3399 dtsi
> >>
> >> Verified with:
> >> make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-isp1.yaml
> >>
> >> Signed-off-by: Shunqian Zheng <zhengsq@xxxxxxxxxxxxxx>
> >> Signed-off-by: Jacob Chen <jacob2.chen@xxxxxxxxxxxxxx>
> >> Signed-off-by: Helen Koike <helen.koike@xxxxxxxxxxxxx>
> >>
> >> ---
> >>
> >> V4:
> >> - update clock names
> >>
> >> V3:
> >> - clean up clocks
> >>
> >> V2:
> >> - re-order power-domains property
> >>
> >> V1:
> >> This patch was originally part of this patchset:
> >>
> >>     https://patchwork.kernel.org/patch/10267431/
> >>
> >> The only difference is:
> >> - add phy properties
> >> - add ports
> >> ---
> >>  arch/arm64/boot/dts/rockchip/rk3399.dtsi | 25 ++++++++++++++++++++++++
> >>  1 file changed, 25 insertions(+)
> >>
> >> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> >> index dba9641947a3a..ed8ba75dbbce8 100644
> >> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> >> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> >> @@ -1721,6 +1721,31 @@ vopb_mmu: iommu@ff903f00 {
> >>              status = "disabled";
> >>      };
> >>
> >> +    isp0: isp0@ff910000 {
> >> +            compatible = "rockchip,rk3399-cif-isp";
> >> +            reg = <0x0 0xff910000 0x0 0x4000>;
> >> +            interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
> >> +            clocks = <&cru SCLK_ISP0>,
> >> +                     <&cru ACLK_ISP0_WRAPPER>,
> >> +                     <&cru HCLK_ISP0_WRAPPER>;
> >> +            clock-names = "isp", "aclk", "hclk";
> >> +            iommus = <&isp0_mmu>;
> >> +            phys = <&mipi_dphy_rx0>;
> >> +            phy-names = "dphy";
> >> +            power-domains = <&power RK3399_PD_ISP0>;
> >
> > Should this have status = "disabled" too? The mipi_dphy_rx0 node is
> > disabled by default too, so in the default configuration the driver
> > would always fail to probe.
>
> I'm thinking what is the overall guideline here.
> Since isp and mipi_dphy are always present in the rk3399, shouldn't they always be enabled?
> Or since they are only useful if a sensor is present, we should let the dts of the board to
> enable it?

I don't have a strong opinion. I'm fine with enabling both by default
as well, as it shouldn't hurt.

That said, I recall some alternative CIF IP block being present on
this SoC as well (and patches posted recently), which AFAIR can't be
activated at the same time as the ISP, so perhaps both of the
alternatives should be disabled by default?

Best regards,
Tomasz



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux