Re: [PATCH v5 8/9] arm64: dts: rockchip: add isp0 node for rk3399

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2020-10-14 17:27, Helen Koike wrote:
Hi Tomasz,

On 9/26/20 10:00 AM, Tomasz Figa wrote:
Hi Helen,

On Wed, Jul 22, 2020 at 12:55:32PM -0300, Helen Koike wrote:
From: Shunqian Zheng <zhengsq@xxxxxxxxxxxxxx>

RK3399 has two ISPs, but only isp0 was tested.
Add isp0 node in rk3399 dtsi

Verified with:
make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-isp1.yaml

Signed-off-by: Shunqian Zheng <zhengsq@xxxxxxxxxxxxxx>
Signed-off-by: Jacob Chen <jacob2.chen@xxxxxxxxxxxxxx>
Signed-off-by: Helen Koike <helen.koike@xxxxxxxxxxxxx>

---

V4:
- update clock names

V3:
- clean up clocks

V2:
- re-order power-domains property

V1:
This patch was originally part of this patchset:

     https://patchwork.kernel.org/patch/10267431/

The only difference is:
- add phy properties
- add ports
---
  arch/arm64/boot/dts/rockchip/rk3399.dtsi | 25 ++++++++++++++++++++++++
  1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index dba9641947a3a..ed8ba75dbbce8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1721,6 +1721,31 @@ vopb_mmu: iommu@ff903f00 {
  		status = "disabled";
  	};
+ isp0: isp0@ff910000 {
+		compatible = "rockchip,rk3399-cif-isp";
+		reg = <0x0 0xff910000 0x0 0x4000>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_ISP0>,
+			 <&cru ACLK_ISP0_WRAPPER>,
+			 <&cru HCLK_ISP0_WRAPPER>;
+		clock-names = "isp", "aclk", "hclk";
+		iommus = <&isp0_mmu>;
+		phys = <&mipi_dphy_rx0>;
+		phy-names = "dphy";
+		power-domains = <&power RK3399_PD_ISP0>;

Should this have status = "disabled" too? The mipi_dphy_rx0 node is
disabled by default too, so in the default configuration the driver
would always fail to probe.

I'm thinking what is the overall guideline here.
Since isp and mipi_dphy are always present in the rk3399, shouldn't they always be enabled?
Or since they are only useful if a sensor is present, we should let the dts of the board to
enable it?

Yes, the usual pattern is that anything which needs additional hardware outside the SoC to be useful is disabled by default in the SoC DTSI, and enabled in individual board DTSs as appropriate. See USB, HDMI, etc. for instance.

There's probably a further debate about how much the board itself should enable if it only breaks out a connector for the user to add their own camera module, but hey, one step at a time ;)

Robin.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux