On 9/14/20 11:22 AM, Lokesh Vutla wrote: > Convert TI K3 Board/SoC bindings to DT schema format. > > Reviewed-by: Grygorii Strashko <grygorii.strashko@xxxxxx> > Signed-off-by: Lokesh Vutla <lokeshvutla@xxxxxx> > --- > .../devicetree/bindings/arm/ti/k3.txt | 26 ---------------- > .../devicetree/bindings/arm/ti/k3.yaml | 31 +++++++++++++++++++ > MAINTAINERS | 2 +- > 3 files changed, 32 insertions(+), 27 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/arm/ti/k3.txt > create mode 100644 Documentation/devicetree/bindings/arm/ti/k3.yaml > > diff --git a/Documentation/devicetree/bindings/arm/ti/k3.txt b/Documentation/devicetree/bindings/arm/ti/k3.txt > deleted file mode 100644 > index 333e7256126a..000000000000 > --- a/Documentation/devicetree/bindings/arm/ti/k3.txt > +++ /dev/null > @@ -1,26 +0,0 @@ > -Texas Instruments K3 Multicore SoC architecture device tree bindings > --------------------------------------------------------------------- > - > -Platforms based on Texas Instruments K3 Multicore SoC architecture > -shall follow the following scheme: > - > -SoCs > ----- > - > -Each device tree root node must specify which exact SoC in K3 Multicore SoC > -architecture it uses, using one of the following compatible values: > - > -- AM654 > - compatible = "ti,am654"; > - > -- J721E > - compatible = "ti,j721e"; > - > -Boards > ------- > - > -In addition, each device tree root node must specify which one or more > -of the following board-specific compatible values: > - > -- AM654 EVM > - compatible = "ti,am654-evm", "ti,am654"; > diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml > new file mode 100644 > index 000000000000..c5e3e4aeda8e > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml > @@ -0,0 +1,31 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/arm/ti/k3.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Texas Instruments K3 Multicore SoC architecture device tree bindings > + > +maintainers: > + - Nishanth Menon <nm@xxxxxx> > + > +description: | > + Platforms based on Texas Instruments K3 Multicore SoC architecture > + shall have the following properties. > + > +properties: > + $nodename: > + const: '/' > + compatible: > + oneOf: > + > + - description: K3 AM654 SoC > + items: > + - enum: > + - ti,am654-evm I am guessing the enum is for adding other vendors compatibles when they get added in the future. Otherwise, const would have sufficed. So, looks ok. Reviewed-by: Suman Anna <s-anna@xxxxxx> regards Suman > + - const: ti,am654 > + > + - description: K3 J721E SoC > + items: > + - const: ti,j721e > +... > diff --git a/MAINTAINERS b/MAINTAINERS > index e4647c84c987..076fae9aa75b 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -2636,7 +2636,7 @@ M: Tero Kristo <t-kristo@xxxxxx> > M: Nishanth Menon <nm@xxxxxx> > L: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx (moderated for non-subscribers) > S: Supported > -F: Documentation/devicetree/bindings/arm/ti/k3.txt > +F: Documentation/devicetree/bindings/arm/ti/k3.yaml > F: arch/arm64/boot/dts/ti/Makefile > F: arch/arm64/boot/dts/ti/k3-* > F: include/dt-bindings/pinctrl/k3.h >
