This series adds initial support for latest new SoC, J7200, from Texas Instruments. The J7200 SoC is a part of the K3 Multicore SoC architecture platform. It is targeted for for automotive gateway, vehicle compute systems, Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications. The SoC aims to meet the complex processing needs of modern embedded products. See J7200 Technical Reference Manual (SPRUIU1, June 2020) for further details: https://www.ti.com/lit/pdf/spruiu1 This series is based on the ti-k3-dts-next from Nishanth's tree[0]. Boot log: https://pastebin.ubuntu.com/p/sJ4Xh4J488/ Changes since v3: - Update epoch in Makefile - Updated ranges for cbass main and mcu_wakeup - s/pinmux/pinctrl - s/navss@/bus@ - Added intr and inta nodes - Added chosen node Changes since v2: - Update Makefile to build dtbs using CONFIG_ARCH_K3 - use 0x00 in all places just to be consistent for all K3 devices - Fixed upper case to lower case in reg property. [0] git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git Lokesh Vutla (5): arm64: dts: ti: Makefile: Use ARCH_K3 for building dtbs dt-bindings: arm: ti: Convert K3 board/soc bindings to DT schema dt-bindings: arm: ti: Add bindings for J7200 SoC arm64: dts: ti: Add support for J7200 SoC arm64: dts: ti: Add support for J7200 Common Processor Board .../devicetree/bindings/arm/ti/k3.txt | 26 -- .../devicetree/bindings/arm/ti/k3.yaml | 35 +++ MAINTAINERS | 2 +- arch/arm64/boot/dts/ti/Makefile | 8 +- .../dts/ti/k3-j7200-common-proc-board.dts | 64 +++++ arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 236 ++++++++++++++++++ .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 95 +++++++ arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 29 +++ arch/arm64/boot/dts/ti/k3-j7200.dtsi | 172 +++++++++++++ 9 files changed, 637 insertions(+), 30 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/ti/k3.txt create mode 100644 Documentation/devicetree/bindings/arm/ti/k3.yaml create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200.dtsi -- 2.28.0
