Re: [PATCH 5/5] ARM: dts: Aspeed: Rainier: Add IBM Operation Panel I2C device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 20 Aug 2020 at 16:12, Eddie James <eajames@xxxxxxxxxxxxx> wrote:
>
> Set I2C bus 7 to multi-master mode and add the panel device that will
> register as a slave.
>
> Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx>

Same comments as for Tacoma.

Reviewed-by: Joel Stanley <joel@xxxxxxxxx>

> ---
>  arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 6 ++++++
>  1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> index b94421f6cbd5..f121f3c26a3a 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> @@ -698,6 +698,7 @@ eeprom@53 {
>  };
>
>  &i2c7 {
> +       multi-master;
>         status = "okay";
>
>         si7021-a20@20 {
> @@ -831,6 +832,11 @@ gpio@15 {
>                 };
>         };
>
> +       ibm-panel@62 {
> +               compatible = "ibm,op-panel";
> +               reg = <0x40000062>;     /* I2C_OWN_SLAVE_ADDRESS */
> +       };
> +
>         dps: dps310@76 {
>                 compatible = "infineon,dps310";
>                 reg = <0x76>;
> --
> 2.26.2
>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux