Re: [PATCH 4/5] ARM: dts: Aspeed: Tacoma: Add IBM Operation Panel I2C device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 20 Aug 2020 at 16:12, Eddie James <eajames@xxxxxxxxxxxxx> wrote:
>
> Set I2C bus 0 to multi-master mode and add the panel device that will
> register as a slave.
>
> Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx>

Reviewed-by: Joel Stanley <joel@xxxxxxxxx>

> ---
>  arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 6 ++++++
>  1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
> index 5f4ee67ac787..9cf2e02ae9e2 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
> @@ -438,7 +438,13 @@ aliases {
>  };
>
>  &i2c0 {
> +       multi-master;
>         status = "okay";
> +
> +       ibm-panel@62 {
> +               compatible = "ibm,op-panel";
> +               reg = <0x40000062>; /* I2C_OWN_SLAVE_ADDRESS */

Other users of SLAVE_ADDRESS have included <dt-bindings/i2c/i2c.h> and
written the reg as follows:

reg = <(I2C_OWN_SLAVE_ADDRESS | 0x62)>

Which obviously has the same result. I'll leave it up to you.

Cheers,

Joel

> +       };
>  };
>
>  &i2c1 {
> --
> 2.26.2
>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux