[PATCH 0/5] input: misc: Add IBM Operation Panel driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series adds support for input from the IBM Operation Panel, which is
a simple controller with three buttons and an LCD display meant for
interacting with a server. It's connected over I2C. This series only
supports the input from the panel, in which the panel masters the I2C bus
and sends data to the host system when someone presses a button on the
controller.

Eddie James (5):
  dt-bindings: input: Add documentation for IBM Operation Panel
  input: misc: Add IBM Operation Panel driver
  i2c: aspeed: Mask IRQ status to relevant bits
  ARM: dts: Aspeed: Tacoma: Add IBM Operation Panel I2C device
  ARM: dts: Aspeed: Rainier: Add IBM Operation Panel I2C device

 .../bindings/input/ibm,op-panel.yaml          |  38 ++++
 MAINTAINERS                                   |   7 +
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts  |   6 +
 arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts   |   6 +
 drivers/i2c/busses/i2c-aspeed.c               |   1 +
 drivers/input/misc/Kconfig                    |  10 +
 drivers/input/misc/Makefile                   |   1 +
 drivers/input/misc/ibm-panel.c                | 186 ++++++++++++++++++
 8 files changed, 255 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/ibm,op-panel.yaml
 create mode 100644 drivers/input/misc/ibm-panel.c

-- 
2.26.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux