Re: [PATCH 1/3] dt-bindings: media: ov772x: Convert to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

On Mon, Aug 24, 2020 at 02:34:40PM +0300, Laurent Pinchart wrote:
> Hi Jacopo,
>
> On Mon, Aug 24, 2020 at 10:32:11AM +0200, Jacopo Mondi wrote:
> > On Wed, Aug 19, 2020 at 04:52:04PM +0300, Laurent Pinchart wrote:
> > > On Tue, Aug 18, 2020 at 02:20:10PM +0200, Jacopo Mondi wrote:
> > > > Convert the ov772x binding document to json-schema and update
> > > > the MAINTAINERS file accordingly.
> > > >
> > > > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > > > ---
> > > >  .../devicetree/bindings/media/i2c/ov772x.txt  | 40 ---------
> > > >  .../devicetree/bindings/media/i2c/ov772x.yaml | 84 +++++++++++++++++++
> > >
> > > Could yuo rename this to ovti,ov772x.yaml ?
> > >
> > > >  MAINTAINERS                                   |  2 +-
> > > >  3 files changed, 85 insertions(+), 41 deletions(-)
> > > >  delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov772x.txt
> > > >  create mode 100644 Documentation/devicetree/bindings/media/i2c/ov772x.yaml
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov772x.txt b/Documentation/devicetree/bindings/media/i2c/ov772x.txt
> > > > deleted file mode 100644
> > > > index 0b3ede5b8e6a..000000000000
> > > > --- a/Documentation/devicetree/bindings/media/i2c/ov772x.txt
> > > > +++ /dev/null
> > > > @@ -1,40 +0,0 @@
> > > > -* Omnivision OV7720/OV7725 CMOS sensor
> > > > -
> > > > -The Omnivision OV7720/OV7725 sensor supports multiple resolutions output,
> > > > -such as VGA, QVGA, and any size scaling down from CIF to 40x30. It also can
> > > > -support the YUV422, RGB565/555/444, GRB422 or raw RGB output formats.
> > > > -
> > > > -Required Properties:
> > > > -- compatible: shall be one of
> > > > -	"ovti,ov7720"
> > > > -	"ovti,ov7725"
> > > > -- clocks: reference to the xclk input clock.
> > > > -
> > > > -Optional Properties:
> > > > -- reset-gpios: reference to the GPIO connected to the RSTB pin which is
> > > > -  active low, if any.
> > > > -- powerdown-gpios: reference to the GPIO connected to the PWDN pin which is
> > > > -  active high, if any.
> > > > -
> > > > -The device node shall contain one 'port' child node with one child 'endpoint'
> > > > -subnode for its digital output video port, in accordance with the video
> > > > -interface bindings defined in Documentation/devicetree/bindings/media/
> > > > -video-interfaces.txt.
> > > > -
> > > > -Example:
> > > > -
> > > > -&i2c0 {
> > > > -	ov772x: camera@21 {
> > > > -		compatible = "ovti,ov7725";
> > > > -		reg = <0x21>;
> > > > -		reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_LOW>;
> > > > -		powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_LOW>;
> > > > -		clocks = <&xclk>;
> > > > -
> > > > -		port {
> > > > -			ov772x_0: endpoint {
> > > > -				remote-endpoint = <&vcap1_in0>;
> > > > -			};
> > > > -		};
> > > > -	};
> > > > -};
> > > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
> > > > new file mode 100644
> > > > index 000000000000..2b84fefeb4aa
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
> > > > @@ -0,0 +1,84 @@
> > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/media/i2c/ov772x.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title:  Omnivision OV7720/OV7725 CMOS sensor
> > > > +
> > > > +maintainers:
> > > > +  - Jacopo Mondi <jacopo@xxxxxxxxxx>
> > > > +
> > > > +description: -|
> > > > +  The Omnivision OV7720/OV7725 sensor supports multiple resolutions output,
> > > > +  such as VGA, QVGA, and any size scaling down from CIF to 40x30. It also can
> > > > +  support the YUV422, RGB565/555/444, GRB422 or raw RGB output formats.
> > > > +
> > > > +properties:
> > > > +  compatible:
> > > > +    enum:
> > > > +      - ovti,ov7720
> > > > +      - ovti,ov7725
> > > > +
> > > > +  reg:
> > > > +    maxItems: 1
> > > > +
> > > > +  clocks:
> > > > +    maxItems: 1
> > > > +
> > > > +  reset-gpios:
> > > > +    description: -|
> > > > +      Reference to the GPIO connected to the RSTB pin which is active low.
> > > > +    maxItems: 1
> > > > +
> > > > +  powerdown-gpios:
> > > > +    description: -|
> > > > +      Reference to the GPIO connected to the PWDN pin which is active high.
> > > > +    maxItems: 1
> > > > +
> > > > +  port:
> > > > +    type: object
> > > > +    description: |
> > > > +      The device node must contain one 'port' child node for its digital output
> > > > +      video port, in accordance with the video interface bindings defined in
> > > > +      Documentation/devicetree/bindings/media/video-interfaces.txt.
> > >
> > > You can simply write
> > >
> > >       Digital input video port. See ../video-interfaces.txt.
> > >
> > > > +
> > > > +    properties:
> > > > +      endpoint:
> > > > +        type: object
> > > > +        properties:
> > > > +          remote-endpoint:
> > > > +            description: A phandle to the bus receiver's endpoint node.
> > >
> > >            required:
> > > 	     - remote-endpoint
> > >
> > >            additionalProperties: false
> >
> > I receveied a reply to you on previous json-schema conversion attempt
> > where you suggested to not set remote-endpoint as required, as we
> > allow empty ones to be later filled in in, maybe with an overlay.
> >
> > Which Laurent should I listen to ? I tend to agree with the one that
> > said to drop remote-endpoint from the required properties list.
>
> Maybe I recall incorrectly, didn't I say that endpoint shouldn't be
> mandatory ? Ports should be mandatory as they describe the hardware,
> endpoints describe a connection, and within a connection, I'm not sure
> to see a use-case for not setting remote-endpoint. Maybe I need to look
> better ? :-)
>

I might be confused as well, but to me port and endpoint should be
there as they represent the available endpoints of the devices connections.
Connections to external devices that can be established (or overwritten)
by applying an overlay, and such are not mandatory.

As I see it:
- port/endpoints: establish the available device connection endpoitns
  and shall be mandatory (also to give a known place where to 'plug'
  the connections)

- remote-endpoints: data connections to external devices, which might
  depend on the board assembly or installed 'capes' and expansions. As
  such, they can be modeled as an overlay fragment to be applied on the
  (known layout of the) device.


> > > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > >
> > > > +
> > > > +    additionalProperties: false
> > > > +
> > > > +required:
> > > > +  - compatible
> > > > +  - reg
> > > > +  - clocks
> > > > +  - reset-gpios
> > > > +  - powerdown-gpios
> > > > +
> > > > +examples:
> > > > +  - |
> > > > +    #include <dt-bindings/gpio/gpio.h>
> > > > +
> > > > +    i2c0 {
> > > > +        #address-cells = <1>;
> > > > +        #size-cells = <0>;
> > > > +        ov772x: camera@21 {
> > > > +            compatible = "ovti,ov7725";
> > > > +            reg = <0x21>;
> > > > +            reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_LOW>;
> > > > +            powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_LOW>;
> > > > +            clocks = <&xclk>;
> > > > +
> > > > +            port {
> > > > +                ov772x_0: endpoint {
> > > > +                    remote-endpoint = <&vcap1_in0>;
> > > > +                };
> > > > +            };
> > > > +        };
> > > > +    };
> > > > +
> > > > +...
> > > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > > index d1a6173d3b64..d0a20214eaaf 100644
> > > > --- a/MAINTAINERS
> > > > +++ b/MAINTAINERS
> > > > @@ -12666,7 +12666,7 @@ M:	Jacopo Mondi <jacopo@xxxxxxxxxx>
> > > >  L:	linux-media@xxxxxxxxxxxxxxx
> > > >  S:	Odd fixes
> > > >  T:	git git://linuxtv.org/media_tree.git
> > > > -F:	Documentation/devicetree/bindings/media/i2c/ov772x.txt
> > > > +F:	Documentation/devicetree/bindings/media/i2c/ov772x.yaml
> > > >  F:	drivers/media/i2c/ov772x.c
> > > >  F:	include/media/i2c/ov772x.h
> > > >
>
> --
> Regards,
>
> Laurent Pinchart



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux