Re: [PATCH 1/3] dt-bindings: media: ov772x: Convert to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jacopo,

Thank you for the patch.

On Tue, Aug 18, 2020 at 02:20:10PM +0200, Jacopo Mondi wrote:
> Convert the ov772x binding document to json-schema and update
> the MAINTAINERS file accordingly.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/media/i2c/ov772x.txt  | 40 ---------
>  .../devicetree/bindings/media/i2c/ov772x.yaml | 84 +++++++++++++++++++

Could yuo rename this to ovti,ov772x.yaml ?

>  MAINTAINERS                                   |  2 +-
>  3 files changed, 85 insertions(+), 41 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov772x.txt
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ov772x.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov772x.txt b/Documentation/devicetree/bindings/media/i2c/ov772x.txt
> deleted file mode 100644
> index 0b3ede5b8e6a..000000000000
> --- a/Documentation/devicetree/bindings/media/i2c/ov772x.txt
> +++ /dev/null
> @@ -1,40 +0,0 @@
> -* Omnivision OV7720/OV7725 CMOS sensor
> -
> -The Omnivision OV7720/OV7725 sensor supports multiple resolutions output,
> -such as VGA, QVGA, and any size scaling down from CIF to 40x30. It also can
> -support the YUV422, RGB565/555/444, GRB422 or raw RGB output formats.
> -
> -Required Properties:
> -- compatible: shall be one of
> -	"ovti,ov7720"
> -	"ovti,ov7725"
> -- clocks: reference to the xclk input clock.
> -
> -Optional Properties:
> -- reset-gpios: reference to the GPIO connected to the RSTB pin which is
> -  active low, if any.
> -- powerdown-gpios: reference to the GPIO connected to the PWDN pin which is
> -  active high, if any.
> -
> -The device node shall contain one 'port' child node with one child 'endpoint'
> -subnode for its digital output video port, in accordance with the video
> -interface bindings defined in Documentation/devicetree/bindings/media/
> -video-interfaces.txt.
> -
> -Example:
> -
> -&i2c0 {
> -	ov772x: camera@21 {
> -		compatible = "ovti,ov7725";
> -		reg = <0x21>;
> -		reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_LOW>;
> -		powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_LOW>;
> -		clocks = <&xclk>;
> -
> -		port {
> -			ov772x_0: endpoint {
> -				remote-endpoint = <&vcap1_in0>;
> -			};
> -		};
> -	};
> -};
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
> new file mode 100644
> index 000000000000..2b84fefeb4aa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
> @@ -0,0 +1,84 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ov772x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title:  Omnivision OV7720/OV7725 CMOS sensor
> +
> +maintainers:
> +  - Jacopo Mondi <jacopo@xxxxxxxxxx>
> +
> +description: -|
> +  The Omnivision OV7720/OV7725 sensor supports multiple resolutions output,
> +  such as VGA, QVGA, and any size scaling down from CIF to 40x30. It also can
> +  support the YUV422, RGB565/555/444, GRB422 or raw RGB output formats.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ovti,ov7720
> +      - ovti,ov7725
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    description: -|
> +      Reference to the GPIO connected to the RSTB pin which is active low.
> +    maxItems: 1
> +
> +  powerdown-gpios:
> +    description: -|
> +      Reference to the GPIO connected to the PWDN pin which is active high.
> +    maxItems: 1
> +
> +  port:
> +    type: object
> +    description: |
> +      The device node must contain one 'port' child node for its digital output
> +      video port, in accordance with the video interface bindings defined in
> +      Documentation/devicetree/bindings/media/video-interfaces.txt.

You can simply write

      Digital input video port. See ../video-interfaces.txt.

> +
> +    properties:
> +      endpoint:
> +        type: object
> +        properties:
> +          remote-endpoint:
> +            description: A phandle to the bus receiver's endpoint node.

           required:
	     - remote-endpoint

           additionalProperties: false

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - reset-gpios
> +  - powerdown-gpios
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c0 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        ov772x: camera@21 {
> +            compatible = "ovti,ov7725";
> +            reg = <0x21>;
> +            reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_LOW>;
> +            powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_LOW>;
> +            clocks = <&xclk>;
> +
> +            port {
> +                ov772x_0: endpoint {
> +                    remote-endpoint = <&vcap1_in0>;
> +                };
> +            };
> +        };
> +    };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d1a6173d3b64..d0a20214eaaf 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12666,7 +12666,7 @@ M:	Jacopo Mondi <jacopo@xxxxxxxxxx>
>  L:	linux-media@xxxxxxxxxxxxxxx
>  S:	Odd fixes
>  T:	git git://linuxtv.org/media_tree.git
> -F:	Documentation/devicetree/bindings/media/i2c/ov772x.txt
> +F:	Documentation/devicetree/bindings/media/i2c/ov772x.yaml
>  F:	drivers/media/i2c/ov772x.c
>  F:	include/media/i2c/ov772x.h
>  

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux