Hi Shimoda-San,
Thanks for the feedback.
> Subject: RE: [PATCH v2 2/5] dt-bindings: usb: renesas,usb3-peri: Document
> HS and SS data bus
>
> Hi Biju-san,
>
> > From: Biju Das, Sent: Monday, August 24, 2020 8:55 PM
> >
> > Hi Shimoda-San,
> >
> > Thanks for the feedback.
> >
> <snip>
> > > > --- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
> > > > +++ b/Documentation/devicetree/bindings/usb/renesas,usb3-
> peri.yaml
> > > <snip>
> > > > @@ -79,9 +92,20 @@ examples:
> > > > companion = <&xhci0>;
> > > > usb-role-switch;
> > > >
> > > > - port {
> > > > - usb3_role_switch: endpoint {
> > > > - remote-endpoint = <&hd3ss3220_ep>;
> > > > - };
> > > > - };
> > > > + ports {
> > >
> > > I think we should use spaces instead of tab here and below.
> >
> > I have ran dt_binding_check on this file and it did n't complain.
> >
> > First 5 character must be space, after that if you use tab, it won't complain.
> > I am not sure is it the correct way or not?
> >
> > Geert/Shimoda-San can you please comment.
> > Based on your input, if needed I will send v3 with only spaces.
>
> I don't know why dt_binding_check didn't complain though, according to
> writing_schema.rst:
> ---
> examples
> Optional. A list of one or more DTS hunks implementing the
> binding. Note: YAML doesn't allow leading tabs, so spaces must be used
> instead.
> ---
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Docu
> mentation/devicetree/writing-schema.rst?h=v5.9-rc2#n71
Thanks for the pointers. I will send v3 with only spaces.
Cheers,
Biju
Renesas Electronics Europe GmbH, Geschaeftsfuehrer/President: Carsten Jauch, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany, Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647
