[PATCH 02/15] iio: sx9310: Update macros declarations

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Follows spec sheet for macro declarations.

Signed-off-by: Daniel Campello <campello@xxxxxxxxxxxx>
---

 drivers/iio/proximity/sx9310.c | 143 +++++++++++++++------------------
 1 file changed, 67 insertions(+), 76 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index d161f3061e353d..07895d4b935d12 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -33,45 +33,45 @@
 #define SX9310_REG_IRQ_SRC				0x00
 #define SX9310_REG_STAT0				0x01
 #define SX9310_REG_STAT1				0x02
+#define SX9310_REG_STAT1_COMPSTAT_MASK			GENMASK(3, 0)
 #define SX9310_REG_IRQ_MSK				0x03
 #define   SX9310_CONVDONE_IRQ				BIT(3)
 #define   SX9310_FAR_IRQ				BIT(5)
 #define   SX9310_CLOSE_IRQ				BIT(6)
-#define   SX9310_EVENT_IRQ				(SX9310_FAR_IRQ | \
-							 SX9310_CLOSE_IRQ)
 #define SX9310_REG_IRQ_FUNC				0x04
 
 #define SX9310_REG_PROX_CTRL0				0x10
-#define   SX9310_REG_PROX_CTRL0_PROXSTAT2		0x10
-#define   SX9310_REG_PROX_CTRL0_EN_MASK			0x0F
+#define   SX9310_REG_PROX_CTRL0_SENSOREN_MASK		GENMASK(3, 0)
+#define   SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK		GENMASK(7, 4)
+#define   SX9310_REG_PROX_CTRL0_SCANPERIOD_SHIFT	4
+#define   SX9310_REG_PROX_CTRL0_SCANPERIOD_15MS		0x01
 #define SX9310_REG_PROX_CTRL1				0x11
 #define SX9310_REG_PROX_CTRL2				0x12
-#define   SX9310_REG_PROX_CTRL2_COMBMODE_ALL		0x80
-#define   SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC	0x04
+#define   SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2	(0x02 << 6)
+#define   SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC	(0x01 << 2)
 #define SX9310_REG_PROX_CTRL3				0x13
-#define   SX9310_REG_PROX_CTRL3_GAIN0_X8		0x0c
+#define   SX9310_REG_PROX_CTRL3_GAIN0_X8		(0x03 << 2)
 #define   SX9310_REG_PROX_CTRL3_GAIN12_X4		0x02
 #define SX9310_REG_PROX_CTRL4				0x14
 #define   SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST	0x07
 #define SX9310_REG_PROX_CTRL5				0x15
-#define   SX9310_REG_PROX_CTRL5_RANGE_SMALL		0xc0
-#define   SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1		0x04
+#define   SX9310_REG_PROX_CTRL5_RANGE_SMALL		(0x03 << 6)
+#define   SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1		(0x01 << 2)
 #define   SX9310_REG_PROX_CTRL5_RAWFILT_1P25		0x02
 #define SX9310_REG_PROX_CTRL6				0x16
-#define   SX9310_REG_PROX_CTRL6_COMP_COMMON		0x20
+#define   SX9310_REG_PROX_CTRL6_AVGTHRESH_DEFAULT	0x20
 #define SX9310_REG_PROX_CTRL7				0x17
-#define   SX9310_REG_PROX_CTRL7_AVGNEGFILT_2		0x08
+#define   SX9310_REG_PROX_CTRL7_AVGNEGFILT_2		(0x01 << 3)
 #define   SX9310_REG_PROX_CTRL7_AVGPOSFILT_512		0x05
 #define SX9310_REG_PROX_CTRL8				0x18
 #define SX9310_REG_PROX_CTRL9				0x19
-#define   SX9310_REG_PROX_CTRL8_9_PTHRESH12_28		0x40
-#define   SX9310_REG_PROX_CTRL8_9_PTHRESH_96		0x88
+#define   SX9310_REG_PROX_CTRL8_9_PTHRESH_28		(0x08 << 3)
+#define   SX9310_REG_PROX_CTRL8_9_PTHRESH_96		(0x11 << 3)
 #define   SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900	0x03
 #define   SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500	0x05
 #define SX9310_REG_PROX_CTRL10				0x1a
-#define   SX9310_REG_PROX_CTRL10_HYST_6PCT		0x10
-#define   SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_8	0x12
-#define   SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_8		0x03
+#define   SX9310_REG_PROX_CTRL10_HYST_6PCT		(0x01 << 4)
+#define   SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_2		0x01
 #define SX9310_REG_PROX_CTRL11				0x1b
 #define SX9310_REG_PROX_CTRL12				0x1c
 #define SX9310_REG_PROX_CTRL13				0x1d
@@ -82,8 +82,8 @@
 #define SX9310_REG_PROX_CTRL18				0x22
 #define SX9310_REG_PROX_CTRL19				0x23
 #define SX9310_REG_SAR_CTRL0				0x2a
-#define   SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES		0x40
-#define   SX9310_REG_SAR_CTRL0_SARHYST_8		0x10
+#define   SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES		(0x02 << 5)
+#define   SX9310_REG_SAR_CTRL0_SARHYST_8		(0x02 << 3)
 #define SX9310_REG_SAR_CTRL1				0x2b
 /* Each increment of the slope register is 0.0078125. */
 #define   SX9310_REG_SAR_CTRL1_SLOPE(_hnslope)		(_hnslope / 78125)
@@ -107,7 +107,7 @@
 #define SX9310_REG_SAR_MSB				0x39
 #define SX9310_REG_SAR_LSB				0x3a
 
-#define SX9310_REG_I2CADDR				0x40
+#define SX9310_REG_I2C_ADDR				0x40
 #define SX9310_REG_PAUSE				0x41
 #define SX9310_REG_WHOAMI				0x42
 #define   SX9310_WHOAMI_VALUE				0x01
@@ -116,14 +116,9 @@
 #define SX9310_REG_RESET				0x7f
 #define   SX9310_SOFT_RESET				0xde
 
-#define SX9310_SCAN_PERIOD_MASK				GENMASK(7, 4)
-#define SX9310_SCAN_PERIOD_SHIFT			4
-
-#define SX9310_COMPSTAT_MASK				GENMASK(3, 0)
 
 /* 4 hardware channels, as defined in STAT0: COMB, CS2, CS1 and CS0. */
 #define SX9310_NUM_CHANNELS				4
-#define SX9310_CHAN_ENABLED_MASK			GENMASK(3, 0)
 
 struct sx9310_data {
 	/* Serialize access to registers and channel configuration */
@@ -251,7 +246,7 @@ static const struct regmap_range sx9310_readable_reg_ranges[] = {
 	regmap_reg_range(SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL19),
 	regmap_reg_range(SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL2),
 	regmap_reg_range(SX9310_REG_SENSOR_SEL, SX9310_REG_SAR_LSB),
-	regmap_reg_range(SX9310_REG_I2CADDR, SX9310_REG_WHOAMI),
+	regmap_reg_range(SX9310_REG_I2C_ADDR, SX9310_REG_WHOAMI),
 	regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET),
 };
 
@@ -292,7 +287,7 @@ static int sx9310_update_chan_en(struct sx9310_data *data,
 
 	if ((data->chan_read | data->chan_event) != (chan_read | chan_event)) {
 		ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
-					 SX9310_CHAN_ENABLED_MASK,
+					 SX9310_REG_PROX_CTRL0_SENSOREN_MASK,
 					 chan_read | chan_event);
 		if (ret)
 			return ret;
@@ -361,7 +356,8 @@ static int sx9310_wait_for_sample(struct sx9310_data *data)
 	if (ret < 0)
 		return ret;
 
-	val = (val & SX9310_SCAN_PERIOD_MASK) >> SX9310_SCAN_PERIOD_SHIFT;
+	val = (val & SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK) >>
+	      SX9310_REG_PROX_CTRL0_SCANPERIOD_SHIFT;
 
 	msleep(sx9310_scan_period_table[val]);
 
@@ -435,7 +431,8 @@ static int sx9310_read_samp_freq(struct sx9310_data *data, int *val, int *val2)
 	if (ret < 0)
 		return ret;
 
-	regval = (regval & SX9310_SCAN_PERIOD_MASK) >> SX9310_SCAN_PERIOD_SHIFT;
+	regval = (regval & SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK) >>
+		 SX9310_REG_PROX_CTRL0_SCANPERIOD_SHIFT;
 	*val = sx9310_samp_freq_table[regval].val;
 	*val2 = sx9310_samp_freq_table[regval].val2;
 
@@ -483,8 +480,8 @@ static int sx9310_set_samp_freq(struct sx9310_data *data, int val, int val2)
 	mutex_lock(&data->mutex);
 
 	ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
-				 SX9310_SCAN_PERIOD_MASK,
-				 i << SX9310_SCAN_PERIOD_SHIFT);
+				 SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK,
+				 i << SX9310_REG_PROX_CTRL0_SCANPERIOD_SHIFT);
 
 	mutex_unlock(&data->mutex);
 
@@ -572,7 +569,7 @@ static irqreturn_t sx9310_irq_thread_handler(int irq, void *private)
 		goto out;
 	}
 
-	if (val & SX9310_EVENT_IRQ)
+	if (val & (SX9310_FAR_IRQ | SX9310_CLOSE_IRQ))
 		sx9310_push_events(indio_dev);
 
 	if (val & SX9310_CONVDONE_IRQ)
@@ -600,6 +597,7 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
 				     enum iio_event_direction dir, int state)
 {
 	struct sx9310_data *data = iio_priv(indio_dev);
+	unsigned int eventirq = SX9310_FAR_IRQ | SX9310_CLOSE_IRQ;
 	int ret;
 
 	/* If the state hasn't changed, there's nothing to do. */
@@ -612,7 +610,7 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
 		if (ret < 0)
 			goto out_unlock;
 		if (!(data->chan_event & ~BIT(chan->channel))) {
-			ret = sx9310_enable_irq(data, SX9310_EVENT_IRQ);
+			ret = sx9310_enable_irq(data, eventirq);
 			if (ret < 0)
 				sx9310_put_event_channel(data, chan->channel);
 		}
@@ -621,7 +619,7 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
 		if (ret < 0)
 			goto out_unlock;
 		if (!data->chan_event) {
-			ret = sx9310_disable_irq(data, SX9310_EVENT_IRQ);
+			ret = sx9310_disable_irq(data, eventirq);
 			if (ret < 0)
 				sx9310_get_event_channel(data, chan->channel);
 		}
@@ -746,53 +744,46 @@ struct sx9310_reg_default {
 	u8 def;
 };
 
-#define SX_INIT(_reg, _def)			\
-	{					\
-		.reg = SX9310_REG_##_reg,	\
-		.def = _def,			\
-	}
-
 static const struct sx9310_reg_default sx9310_default_regs[] = {
-	SX_INIT(IRQ_MSK, 0x00),
-	SX_INIT(IRQ_FUNC, 0x00),
+	{ SX9310_REG_IRQ_MSK, 0x00 },
+	{ SX9310_REG_IRQ_FUNC, 0x00 },
 	/*
 	 * The lower 4 bits should not be set as it enable sensors measurements.
 	 * Turning the detection on before the configuration values are set to
 	 * good values can cause the device to return erroneous readings.
 	 */
-	SX_INIT(PROX_CTRL0, SX9310_REG_PROX_CTRL0_PROXSTAT2),
-	SX_INIT(PROX_CTRL1, 0x00),
-	SX_INIT(PROX_CTRL2, SX9310_REG_PROX_CTRL2_COMBMODE_ALL |
-			    SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC),
-	SX_INIT(PROX_CTRL3, SX9310_REG_PROX_CTRL3_GAIN0_X8 |
-			    SX9310_REG_PROX_CTRL3_GAIN12_X4),
-	SX_INIT(PROX_CTRL4, SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST),
-	SX_INIT(PROX_CTRL5, SX9310_REG_PROX_CTRL5_RANGE_SMALL |
-			    SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 |
-			    SX9310_REG_PROX_CTRL5_RAWFILT_1P25),
-	SX_INIT(PROX_CTRL6, SX9310_REG_PROX_CTRL6_COMP_COMMON),
-	SX_INIT(PROX_CTRL7, SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 |
-			    SX9310_REG_PROX_CTRL7_AVGPOSFILT_512),
-	SX_INIT(PROX_CTRL8, SX9310_REG_PROX_CTRL8_9_PTHRESH_96 |
-			    SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500),
-	SX_INIT(PROX_CTRL9, SX9310_REG_PROX_CTRL8_9_PTHRESH12_28 |
-			    SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900),
-	SX_INIT(PROX_CTRL10, SX9310_REG_PROX_CTRL10_HYST_6PCT |
-			     SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_8 |
-			     SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_8),
-	SX_INIT(PROX_CTRL11, 0x00),
-	SX_INIT(PROX_CTRL12, 0x00),
-	SX_INIT(PROX_CTRL13, 0x00),
-	SX_INIT(PROX_CTRL14, 0x00),
-	SX_INIT(PROX_CTRL15, 0x00),
-	SX_INIT(PROX_CTRL16, 0x00),
-	SX_INIT(PROX_CTRL17, 0x00),
-	SX_INIT(PROX_CTRL18, 0x00),
-	SX_INIT(PROX_CTRL19, 0x00),
-	SX_INIT(SAR_CTRL0, SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES |
-			   SX9310_REG_SAR_CTRL0_SARHYST_8),
-	SX_INIT(SAR_CTRL1, SX9310_REG_SAR_CTRL1_SLOPE(10781250)),
-	SX_INIT(SAR_CTRL2, SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT),
+	{ SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL0_SCANPERIOD_15MS },
+	{ SX9310_REG_PROX_CTRL1, 0x00 },
+	{ SX9310_REG_PROX_CTRL2, SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2 |
+				 SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC },
+	{ SX9310_REG_PROX_CTRL3, SX9310_REG_PROX_CTRL3_GAIN0_X8 |
+				 SX9310_REG_PROX_CTRL3_GAIN12_X4 },
+	{ SX9310_REG_PROX_CTRL4, SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST },
+	{ SX9310_REG_PROX_CTRL5, SX9310_REG_PROX_CTRL5_RANGE_SMALL |
+				 SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 |
+				 SX9310_REG_PROX_CTRL5_RAWFILT_1P25 },
+	{ SX9310_REG_PROX_CTRL6, SX9310_REG_PROX_CTRL6_AVGTHRESH_DEFAULT },
+	{ SX9310_REG_PROX_CTRL7, SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 |
+				 SX9310_REG_PROX_CTRL7_AVGPOSFILT_512 },
+	{ SX9310_REG_PROX_CTRL8, SX9310_REG_PROX_CTRL8_9_PTHRESH_96 |
+				 SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500 },
+	{ SX9310_REG_PROX_CTRL9, SX9310_REG_PROX_CTRL8_9_PTHRESH_28 |
+				 SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900 },
+	{ SX9310_REG_PROX_CTRL10, SX9310_REG_PROX_CTRL10_HYST_6PCT |
+				  SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_2 },
+	{ SX9310_REG_PROX_CTRL11, 0x00 },
+	{ SX9310_REG_PROX_CTRL12, 0x00 },
+	{ SX9310_REG_PROX_CTRL13, 0x00 },
+	{ SX9310_REG_PROX_CTRL14, 0x00 },
+	{ SX9310_REG_PROX_CTRL15, 0x00 },
+	{ SX9310_REG_PROX_CTRL16, 0x00 },
+	{ SX9310_REG_PROX_CTRL17, 0x00 },
+	{ SX9310_REG_PROX_CTRL18, 0x00 },
+	{ SX9310_REG_PROX_CTRL19, 0x00 },
+	{ SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES |
+				SX9310_REG_SAR_CTRL0_SARHYST_8 },
+	{ SX9310_REG_SAR_CTRL1, SX9310_REG_SAR_CTRL1_SLOPE(10781250) },
+	{ SX9310_REG_SAR_CTRL2, SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT },
 };
 
 /* Activate all channels and perform an initial compensation. */
@@ -809,7 +800,7 @@ static int sx9310_init_compensation(struct iio_dev *indio_dev)
 
 	/* run the compensation phase on all channels */
 	ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
-			   ctrl0 | SX9310_REG_PROX_CTRL0_EN_MASK);
+			   ctrl0 | SX9310_REG_PROX_CTRL0_SENSOREN_MASK);
 	if (ret < 0)
 		return ret;
 
@@ -992,7 +983,7 @@ static int __maybe_unused sx9310_suspend(struct device *dev)
 	if (ret)
 		goto out;
 
-	ctrl0 = data->suspend_ctrl0 & ~SX9310_REG_PROX_CTRL0_EN_MASK;
+	ctrl0 = data->suspend_ctrl0 & ~SX9310_REG_PROX_CTRL0_SENSOREN_MASK;
 	ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0);
 	if (ret)
 		goto out;
-- 
2.28.0.rc0.142.g3c755180ce-goog




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux