Re: [PATCH RESEND v6 5/5] USB: PHY: JZ4770: Use the generic PHY framework.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Paul,

在 2020/7/25 下午8:58, Paul Cercueil 写道:
Hi Zhou,

I'm a bit lost in all these JZ4770 PHY patchsets...

Anyway, the move from drivers/usb/phy to drivers/phy should be done before adding anything else to the driver, so right after the devicetree change. Here, your patch modifies things that were just introduced in the previous patches; that adds a lot of noise for nothing and is harder to review.
If you really want to rename the function names and comments from 
jz4770_phy* to ingenic_usb_phy*, you can do it afterwards, within your 
current "unify code style" patch. Then add the patch to reformat the 
macros, and then finally finish the patchset by adding support for the 
new SoCs, because right now the macros introduced in the "add SoCs" 
patch are modified in the "reformat macros" patch.
So I think you got the content right, just some reordering to do.

Sorry for the delay caused by the mailbox failure. Now the first four 
patches have been merged into next. I think I need to make a new patch 
to move the driver to drivers/phy/
Thanks and best regards!


Le sam. 25 juil. 2020 à 15:33, 周琰杰 (Zhou Yanjie) 
<zhouyanjie@xxxxxxxxxxxxxx> a écrit :
Used the generic PHY framework API to create the PHY,
and move the driver to driver/phy/ingenic.

Tested-by: 周正 (Zhou Zheng) <sernia.zhou@xxxxxxxxxxx>
Suggested-by: Felipe Balbi <balbi@xxxxxxxxxx>
Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@xxxxxxxxxxx>
Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@xxxxxxxxxxx>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>
---

Notes:
    v6:
    New patch.

 drivers/phy/Kconfig                                |   1 +
 drivers/phy/Makefile                               |   1 +
 drivers/phy/ingenic/Kconfig                        |  12 ++
 drivers/phy/ingenic/Makefile                       |   2 +
 .../phy-jz4770.c => phy/ingenic/phy-ingenic-usb.c} | 208 ++++++++++++---------
 drivers/usb/phy/Kconfig                            |   8 -
 drivers/usb/phy/Makefile                           |   1 -
 7 files changed, 134 insertions(+), 99 deletions(-)
 create mode 100644 drivers/phy/ingenic/Kconfig
 create mode 100644 drivers/phy/ingenic/Makefile
 rename drivers/{usb/phy/phy-jz4770.c => phy/ingenic/phy-ingenic-usb.c} (67%)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index b3ed94b98d9b..96d7bb85f595 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -55,6 +55,7 @@ source "drivers/phy/broadcom/Kconfig"
 source "drivers/phy/cadence/Kconfig"
 source "drivers/phy/freescale/Kconfig"
 source "drivers/phy/hisilicon/Kconfig"
+source "drivers/phy/ingenic/Kconfig"
 source "drivers/phy/lantiq/Kconfig"
 source "drivers/phy/marvell/Kconfig"
 source "drivers/phy/mediatek/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 310c149a9df5..0f88724b4387 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -18,6 +18,7 @@ obj-y                    += broadcom/    \
                        cadence/    \
                        freescale/    \
                        hisilicon/    \
+                       ingenic/    \
                        intel/    \
                        lantiq/    \
                        marvell/    \
diff --git a/drivers/phy/ingenic/Kconfig b/drivers/phy/ingenic/Kconfig
new file mode 100644
index 000000000000..b9581eae89dd
--- /dev/null
+++ b/drivers/phy/ingenic/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Phy drivers for Ingenic platforms
+#
+config PHY_INGENIC_USB
+    tristate "Ingenic SoCs USB PHY Driver"
+    depends on (MACH_INGENIC && MIPS) || COMPILE_TEST
+    depends on USB_SUPPORT
+    select GENERIC_PHY
+    help
+      This driver provides USB PHY support for the USB controller found
+      on the JZ-series and X-series SoCs from Ingenic.
diff --git a/drivers/phy/ingenic/Makefile b/drivers/phy/ingenic/Makefile
new file mode 100644
index 000000000000..65d5ea00fc9d
--- /dev/null
+++ b/drivers/phy/ingenic/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y        += phy-ingenic-usb.o
diff --git a/drivers/usb/phy/phy-jz4770.c b/drivers/phy/ingenic/phy-ingenic-usb.c
similarity index 67%
rename from drivers/usb/phy/phy-jz4770.c
rename to drivers/phy/ingenic/phy-ingenic-usb.c
index 23d38cbc150e..c43d53b235d3 100644
--- a/drivers/usb/phy/phy-jz4770.c
+++ b/drivers/phy/ingenic/phy-ingenic-usb.c
@@ -7,12 +7,12 @@
  */

 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/phy.h>
+#include <linux/phy/phy.h>

 /* OTGPHY register offsets */
 #define REG_USBPCR_OFFSET            0x00
@@ -97,66 +97,48 @@ enum ingenic_usb_phy_version {
 struct ingenic_soc_info {
     enum ingenic_usb_phy_version version;

-    void (*usb_phy_init)(struct usb_phy *phy);
+    void (*usb_phy_init)(struct phy *phy);
 };

-struct jz4770_phy {
+struct ingenic_usb_phy {
     const struct ingenic_soc_info *soc_info;

-    struct usb_phy phy;
-    struct usb_otg otg;
+    struct phy *phy;
     struct device *dev;
     void __iomem *base;
     struct clk *clk;
     struct regulator *vcc_supply;
 };

-static inline struct jz4770_phy *otg_to_jz4770_phy(struct usb_otg *otg)
+static int ingenic_usb_phy_init(struct phy *phy)
 {
-    return container_of(otg, struct jz4770_phy, otg);
-}
-
-static inline struct jz4770_phy *phy_to_jz4770_phy(struct usb_phy *phy)
-{
-    return container_of(phy, struct jz4770_phy, phy);
-}
-
-static int ingenic_usb_phy_set_peripheral(struct usb_otg *otg,
-                     struct usb_gadget *gadget)
-{
-    struct jz4770_phy *priv = otg_to_jz4770_phy(otg);
-    u32 reg;
+    struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
+    int err;

-    if (priv->soc_info->version >= ID_X1000) {
-        reg = readl(priv->base + REG_USBPCR1_OFFSET);
-        reg |= USBPCR1_BVLD_REG;
-        writel(reg, priv->base + REG_USBPCR1_OFFSET);
+    err = clk_prepare_enable(priv->clk);
+    if (err) {
+        dev_err(priv->dev, "Unable to start clock: %d\n", err);
+        return err;
     }

-    reg = readl(priv->base + REG_USBPCR_OFFSET);
-    reg &= ~USBPCR_USB_MODE;
-    reg |= USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE;
-    writel(reg, priv->base + REG_USBPCR_OFFSET);
+    priv->soc_info->usb_phy_init(phy);

     return 0;
 }

-static int ingenic_usb_phy_set_host(struct usb_otg *otg, struct usb_bus *host)
+static int ingenic_usb_phy_exit(struct phy *phy)
 {
-    struct jz4770_phy *priv = otg_to_jz4770_phy(otg);
-    u32 reg;
+    struct ingenic_usb_phy *priv = phy_get_drvdata(phy);

-    reg = readl(priv->base + REG_USBPCR_OFFSET);
-    reg &= ~(USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE);
-    reg |= USBPCR_USB_MODE;
-    writel(reg, priv->base + REG_USBPCR_OFFSET);
+    clk_disable_unprepare(priv->clk);
+    regulator_disable(priv->vcc_supply);

     return 0;
 }

-static int ingenic_usb_phy_init(struct usb_phy *phy)
+static int ingenic_usb_phy_power_on(struct phy *phy)
 {
-    struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+    struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
     int err;

     err = regulator_enable(priv->vcc_supply);
@@ -165,33 +147,71 @@ static int ingenic_usb_phy_init(struct usb_phy *phy)
         return err;
     }

-    err = clk_prepare_enable(priv->clk);
-    if (err) {
-        dev_err(priv->dev, "Unable to start clock: %d\n", err);
-        return err;
-    }
-
-    priv->soc_info->usb_phy_init(phy);
-
     return 0;
 }

-static void ingenic_usb_phy_shutdown(struct usb_phy *phy)
+static int ingenic_usb_phy_power_off(struct phy *phy)
 {
-    struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+    struct ingenic_usb_phy *priv = phy_get_drvdata(phy);

-    clk_disable_unprepare(priv->clk);
     regulator_disable(priv->vcc_supply);
+
+    return 0;
 }

-static void ingenic_usb_phy_remove(void *phy)
+static int ingenic_usb_phy_set_mode(struct phy *phy,
+                  enum phy_mode mode, int submode)
 {
-    usb_remove_phy(phy);
+    struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
+    u32 reg;
+
+    switch (mode) {
+    case PHY_MODE_USB_HOST:
+        reg = readl(priv->base + REG_USBPCR_OFFSET);
+        reg &= ~(USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE);
+        reg |= USBPCR_USB_MODE;
+        writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+        break;
+    case PHY_MODE_USB_DEVICE:
+        if (priv->soc_info->version >= ID_X1000) {
+            reg = readl(priv->base + REG_USBPCR1_OFFSET);
+            reg |= USBPCR1_BVLD_REG;
+            writel(reg, priv->base + REG_USBPCR1_OFFSET);
+        }
+
+        reg = readl(priv->base + REG_USBPCR_OFFSET);
+        reg &= ~USBPCR_USB_MODE;
+        reg |= USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE;
+        writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+        break;
+    case PHY_MODE_USB_OTG:
+        reg = readl(priv->base + REG_USBPCR_OFFSET);
+        reg &= ~USBPCR_OTG_DISABLE;
+        reg |= USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_USB_MODE;
+        writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+        break;
+    default:
+        return -EINVAL;
+    }
+
+    return 0;
 }

-static void jz4770_usb_phy_init(struct usb_phy *phy)
+static const struct phy_ops ingenic_usb_phy_ops = {
+    .init        = ingenic_usb_phy_init,
+    .exit        = ingenic_usb_phy_exit,
+    .power_on    = ingenic_usb_phy_power_on,
+    .power_off    = ingenic_usb_phy_power_off,
+    .set_mode    = ingenic_usb_phy_set_mode,
+    .owner        = THIS_MODULE,
+};
+
+static void jz4770_usb_phy_init(struct phy *phy)
 {
-    struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+    struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
     u32 reg;

     reg = USBPCR_AVLD_REG | USBPCR_COMMONONN | USBPCR_IDPULLUP_ALWAYS |
@@ -206,9 +226,9 @@ static void jz4770_usb_phy_init(struct usb_phy *phy)
     usleep_range(300, 1000);
 }

-static void jz4780_usb_phy_init(struct usb_phy *phy)
+static void jz4780_usb_phy_init(struct phy *phy)
 {
-    struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+    struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
     u32 reg;

     reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_USB_SEL |
@@ -224,9 +244,9 @@ static void jz4780_usb_phy_init(struct usb_phy *phy)
     usleep_range(300, 1000);
 }

-static void x1000_usb_phy_init(struct usb_phy *phy)
+static void x1000_usb_phy_init(struct phy *phy)
 {
-    struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+    struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
     u32 reg;

     reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_WORD_IF_16BIT;
@@ -243,9 +263,9 @@ static void x1000_usb_phy_init(struct usb_phy *phy)
     usleep_range(300, 1000);
 }

-static void x1830_usb_phy_init(struct usb_phy *phy)
+static void x1830_usb_phy_init(struct phy *phy)
 {
-    struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+    struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
     u32 reg;

     /* rdt */
@@ -298,75 +318,83 @@ static const struct of_device_id ingenic_usb_phy_of_matches[] = {
 };
 MODULE_DEVICE_TABLE(of, ingenic_usb_phy_of_matches);

-static int jz4770_phy_probe(struct platform_device *pdev)
+static int ingenic_usb_phy_probe(struct platform_device *pdev)
 {
-    struct device *dev = &pdev->dev;
-    struct jz4770_phy *priv;
+    struct ingenic_usb_phy *priv;
+    struct phy_provider *provider;
     int err;

-    priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+    priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
     if (!priv)
         return -ENOMEM;

+    priv->dev = &pdev->dev;
+
     priv->soc_info = device_get_match_data(&pdev->dev);
     if (!priv->soc_info) {
         dev_err(&pdev->dev, "Error: No device match found\n");
         return -ENODEV;
     }

-    platform_set_drvdata(pdev, priv);
-    priv->dev = dev;
-    priv->phy.dev = dev;
-    priv->phy.otg = &priv->otg;
-    priv->phy.label = "ingenic-usb-phy";
-    priv->phy.init = ingenic_usb_phy_init;
-    priv->phy.shutdown = ingenic_usb_phy_shutdown;
-
-    priv->otg.state = OTG_STATE_UNDEFINED;
-    priv->otg.usb_phy = &priv->phy;
-    priv->otg.set_host = ingenic_usb_phy_set_host;
-    priv->otg.set_peripheral = ingenic_usb_phy_set_peripheral;
-
     priv->base = devm_platform_ioremap_resource(pdev, 0);
     if (IS_ERR(priv->base)) {
-        dev_err(dev, "Failed to map registers\n");
+        dev_err(priv->dev, "Failed to map registers\n");
         return PTR_ERR(priv->base);
     }

-    priv->clk = devm_clk_get(dev, NULL);
+    priv->clk = devm_clk_get(priv->dev, NULL);
     if (IS_ERR(priv->clk)) {
         err = PTR_ERR(priv->clk);
         if (err != -EPROBE_DEFER)
-            dev_err(dev, "Failed to get clock\n");
+            dev_err(priv->dev, "Failed to get clock\n");
         return err;
     }

-    priv->vcc_supply = devm_regulator_get(dev, "vcc");
+    priv->vcc_supply = devm_regulator_get(priv->dev, "vcc");
     if (IS_ERR(priv->vcc_supply)) {
         err = PTR_ERR(priv->vcc_supply);
         if (err != -EPROBE_DEFER)
-            dev_err(dev, "Failed to get regulator\n");
+            dev_err(priv->dev, "Failed to get regulator\n");
         return err;
     }

-    err = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
-    if (err) {
-        if (err != -EPROBE_DEFER)
-            dev_err(dev, "Unable to register PHY\n");
-        return err;
+    priv->phy = devm_phy_create(priv->dev, NULL, &ingenic_usb_phy_ops);
+    if (IS_ERR(priv)) {
+        dev_err(priv->dev, "Failed to create PHY: %ld\n", PTR_ERR(priv));
+        return PTR_ERR(priv);
     }

-    return devm_add_action_or_reset(dev, ingenic_usb_phy_remove, &priv->phy); +    provider = devm_of_phy_provider_register(priv->dev, of_phy_simple_xlate);
+    if (IS_ERR(provider)) {
+        dev_err(priv->dev, "Failed to register PHY provider: %ld\n", PTR_ERR(provider));
+        return PTR_ERR(provider);
+    }
+
+    platform_set_drvdata(pdev, priv);
+    phy_set_drvdata(priv->phy, priv);
+
+    return 0;
+}
+
+static int ingenic_usb_phy_remove(struct platform_device *pdev)
+{
+    struct ingenic_usb_phy *priv = platform_get_drvdata(pdev);
+
+    clk_disable_unprepare(priv->clk);
+    regulator_disable(priv->vcc_supply);
+
+    return 0;
 }

-static struct platform_driver ingenic_phy_driver = {
-    .probe        = jz4770_phy_probe,
+static struct platform_driver ingenic_usb_phy_driver = {
+    .probe        = ingenic_usb_phy_probe,
+    .remove        = ingenic_usb_phy_remove,
     .driver        = {
-        .name    = "jz4770-phy",
+        .name    = "ingenic-usb-phy",
         .of_match_table = of_match_ptr(ingenic_usb_phy_of_matches),
     },
 };
-module_platform_driver(ingenic_phy_driver);
+module_platform_driver(ingenic_usb_phy_driver);

 MODULE_AUTHOR("周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>");
 MODULE_AUTHOR("漆鹏振 (Qi Pengzhen) <aric.pzqi@xxxxxxxxxxx>");
Finally, because of the renaming, the module name changed. To keep 
compatibility with userspace, I think you need to add a 
MODULE_ALIAS(jz4770_phy) here (but I'm not sure and maybe someone else 
should confirm that).
Cheers,
-Paul

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index ef4787cd3d37..ff24fca0a2d9 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -184,12 +184,4 @@ config USB_ULPI_VIEWPORT
       Provides read/write operations to the ULPI phy register set for
       controllers with a viewport register (e.g. Chipidea/ARC controllers).
-config JZ4770_PHY
-    tristate "Ingenic SoCs Transceiver Driver"
-    depends on MIPS || COMPILE_TEST
-    select USB_PHY
-    help
-      This driver provides PHY support for the USB controller found
-      on the JZ-series and X-series SoCs from Ingenic.
-
 endmenu
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index b352bdbe8712..df1d99010079 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -24,4 +24,3 @@ obj-$(CONFIG_USB_MXS_PHY)        += phy-mxs-usb.o
 obj-$(CONFIG_USB_ULPI)            += phy-ulpi.o
 obj-$(CONFIG_USB_ULPI_VIEWPORT)        += phy-ulpi-viewport.o
 obj-$(CONFIG_KEYSTONE_USB_PHY)        += phy-keystone.o
-obj-$(CONFIG_JZ4770_PHY)        += phy-jz4770.o
--
2.11.0


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux