The first patch resends the DT binding for the driver that was merged in v5.8-rc1 with a small change to update for proper regulators. The second through the eleventh patch fixes several issues dropped from v8 to v9 when the initial patch was merged. The twelveth patch fixes a few printks that are missing newlines and should be totally non-trivial to apply. The thirteenth patch drops channel_users because it's unused. The final patch adds support to enable the svdd and vdd supplies so that this driver can work on a board where the svdd supply isn't enabled at boot and needs to be turned on before this driver starts to communicate with the chip. Daniel Campello (12): dt-bindings: iio: Add bindings for sx9310 sensor iio: sx9310: Update macros declarations iio: sx9310: Fix irq handling iio: sx9310: Remove acpi and of table macros iio: sx9310: Change from .probe to .probe_new iio: sx9310: Align memory iio: sx9310: Use long instead of int for channel bitmaps iio: sx9310: Use regmap_read_poll_timeout() for compensation iio: sx9310: Update copyright iio: sx9310: Simplify error return handling iio: sx9310: Use variable to hold &client->dev iio: sx9310: Miscellaneous format fixes Stephen Boyd (3): iio: sx9310: Add newlines to printks iio: sx9310: Drop channel_users[] iio: sx9310: Enable vdd and svdd regulators at probe .../iio/proximity/semtech,sx9310.yaml | 60 +++ drivers/iio/proximity/sx9310.c | 407 +++++++++--------- 2 files changed, 263 insertions(+), 204 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml -- 2.28.0.rc0.142.g3c755180ce-goog
