From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
Printks in the kernel have newlines at the end. Add them to the few
printks in this driver.
Reviewed-by: Daniel Campello <campello@xxxxxxxxxxxx>
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Fixes: 72ad02b15d63 ("iio: Add SEMTECH SX9310/9311 sensor driver")
Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
Signed-off-by: Daniel Campello <campello@xxxxxxxxxxxx>
---
drivers/iio/proximity/sx9310.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 3f981d28ee4056..4553ee83a016a3 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -809,7 +809,7 @@ static int sx9310_init_compensation(struct iio_dev *indio_dev)
if (ret) {
if (ret == -ETIMEDOUT)
dev_err(&data->client->dev,
- "0x02 << 3l compensation timed out: 0x%02x",
+ "0x02 << 3l compensation timed out: 0x%02x\n",
val);
return ret;
}
@@ -855,7 +855,7 @@ static int sx9310_set_indio_dev_name(struct device *dev,
ddata = (uintptr_t)device_get_match_data(dev);
if (ddata != whoami) {
- dev_err(dev, "WHOAMI does not match device data: %u", whoami);
+ dev_err(dev, "WHOAMI does not match device data: %u\n", whoami);
return -ENODEV;
}
@@ -867,7 +867,7 @@ static int sx9310_set_indio_dev_name(struct device *dev,
indio_dev->name = "sx9311";
break;
default:
- dev_err(dev, "unexpected WHOAMI response: %u", whoami);
+ dev_err(dev, "unexpected WHOAMI response: %u\n", whoami);
return -ENODEV;
}
@@ -896,7 +896,7 @@ static int sx9310_probe(struct i2c_client *client)
ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
if (ret) {
- dev_err(dev, "error in reading WHOAMI register: %d", ret);
+ dev_err(dev, "error in reading WHOAMI register: %d\n", ret);
return ret;
}
--
2.28.0.rc0.142.g3c755180ce-goog
