Re: [PATCH 1/2] dt-bindings: Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 25 Jul 2020 23:14:56 +0200, Marek Vasut wrote:
> Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge, this
> one is used in the Raspberry Pi 7" touchscreen display unit.
> 
> Signed-off-by: Marek Vasut <marex@xxxxxxx>
> To: dri-devel@xxxxxxxxxxxxxxxxxxxxx
> Cc: Eric Anholt <eric@xxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> ---
>  .../display/bridge/toshiba,tc358762.yaml      | 116 ++++++++++++++++++
>  1 file changed, 116 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.example.dts:20.13-23: Warning (reg_format): /example-0/bridge@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.example.dt.yaml: example-0: bridge@0:reg:0: [0] is too short
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.example.dt.yaml: bridge@0: '#address-cells', '#size-cells', 'port@0', 'port@1' do not match any of the regexes: 'pinctrl-[0-9]+'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.example.dt.yaml: bridge@0: 'ports' is a required property


See https://patchwork.ozlabs.org/patch/1336337

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux