Hi,
On 7/23/20 9:06 PM, Stanimir Varbanov wrote:
> Hi Rajendra,
>
> After applying 2,3 and 4/5 patches on linaro-integration v5.8-rc2 I see
> below messages on db845:
>
> qcom-venus aa00000.video-codec: dev_pm_opp_set_rate: failed to find
> current OPP for freq 533000097 (-34)
>
> ^^^ This one is new.
>
> qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x30000
>
> ^^^ and this message is annoying, can we make it pr_debug in rpmh?
>
> On 7/23/20 2:26 PM, Rajendra Nayak wrote:
>> Add the OPP tables in order to be able to vote on the performance state of
>> a power-domain.
>>
>> Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
>> ---
>> arch/arm64/boot/dts/qcom/sdm845.dtsi | 40 ++++++++++++++++++++++++++++++++++--
>> 1 file changed, 38 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> index e506793..5ca2265 100644
>> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> @@ -3631,8 +3631,10 @@
>> interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
>> power-domains = <&videocc VENUS_GDSC>,
>> <&videocc VCODEC0_GDSC>,
>> - <&videocc VCODEC1_GDSC>;
>> - power-domain-names = "venus", "vcodec0", "vcodec1";
>> + <&videocc VCODEC1_GDSC>,
>> + <&rpmhpd SDM845_CX>;
>> + power-domain-names = "venus", "vcodec0", "vcodec1", "cx";
>> + operating-points-v2 = <&venus_opp_table>;
>> clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
>> <&videocc VIDEO_CC_VENUS_AHB_CLK>,
>> <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
>> @@ -3654,6 +3656,40 @@
>> video-core1 {
>> compatible = "venus-encoder";
>> };
>> +
>> + venus_opp_table: venus-opp-table {
>> + compatible = "operating-points-v2";
>> +
>> + opp-100000000 {
>> + opp-hz = /bits/ 64 <100000000>;
>> + required-opps = <&rpmhpd_opp_min_svs>;
>> + };
>> +
>> + opp-200000000 {
>> + opp-hz = /bits/ 64 <200000000>;
>> + required-opps = <&rpmhpd_opp_low_svs>;
>> + };
>> +
>> + opp-320000000 {
>> + opp-hz = /bits/ 64 <320000000>;
>> + required-opps = <&rpmhpd_opp_svs>;
>> + };
>> +
>> + opp-380000000 {
>> + opp-hz = /bits/ 64 <380000000>;
>> + required-opps = <&rpmhpd_opp_svs_l1>;
>> + };
>> +
>> + opp-444000000 {
>> + opp-hz = /bits/ 64 <444000000>;
>> + required-opps = <&rpmhpd_opp_nom>;
>> + };
>> +
>> + opp-533000000 {
>> + opp-hz = /bits/ 64 <533000000>;
Actually it comes from videocc, where ftbl_video_cc_venus_clk_src
defines 533000000 but the real calculated freq is 533000097.
If I change to opp-hz = /bits/ 64 <533000097> the error disappear.
I guess we have to revisit m/n and/or pre-divider for this freq when the
source pll is P_VIDEO_PLL0_OUT_MAIN PLL?
>> + required-opps = <&rpmhpd_opp_turbo>;
>> + };
>> + };
>> };
>>
>> videocc: clock-controller@ab00000 {
>>
>
--
regards,
Stan
