Re: [PATCH v4 4/5] arm64: dts: sdm845: Add OPP tables and power-domains for venus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 7/24/2020 7:39 PM, Stanimir Varbanov wrote:
Hi,

On 7/23/20 9:06 PM, Stanimir Varbanov wrote:
Hi Rajendra,

After applying 2,3 and 4/5 patches on linaro-integration v5.8-rc2 I see
below messages on db845:

qcom-venus aa00000.video-codec: dev_pm_opp_set_rate: failed to find
current OPP for freq 533000097 (-34)

^^^ This one is new.

qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x30000

^^^ and this message is annoying, can we make it pr_debug in rpmh?

On 7/23/20 2:26 PM, Rajendra Nayak wrote:
Add the OPP tables in order to be able to vote on the performance state of
a power-domain.

Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/sdm845.dtsi | 40 ++++++++++++++++++++++++++++++++++--
  1 file changed, 38 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index e506793..5ca2265 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3631,8 +3631,10 @@
  			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
  			power-domains = <&videocc VENUS_GDSC>,
  					<&videocc VCODEC0_GDSC>,
-					<&videocc VCODEC1_GDSC>;
-			power-domain-names = "venus", "vcodec0", "vcodec1";
+					<&videocc VCODEC1_GDSC>,
+					<&rpmhpd SDM845_CX>;
+			power-domain-names = "venus", "vcodec0", "vcodec1", "cx";
+			operating-points-v2 = <&venus_opp_table>;
  			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
  				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
  				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
@@ -3654,6 +3656,40 @@
  			video-core1 {
  				compatible = "venus-encoder";
  			};
+
+			venus_opp_table: venus-opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-380000000 {
+					opp-hz = /bits/ 64 <380000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-444000000 {
+					opp-hz = /bits/ 64 <444000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+
+				opp-533000000 {
+					opp-hz = /bits/ 64 <533000000>;

Actually it comes from videocc, where ftbl_video_cc_venus_clk_src
defines 533000000 but the real calculated freq is 533000097.

I still don't quite understand why the videocc driver returns this
frequency despite this not being in the freq table.
I would expect a clk_round_rate() when called with 533000097 to return
a 533000000.

Taniya, Do you know why?


If I change to opp-hz = /bits/ 64 <533000097> the error disappear.

I guess we have to revisit m/n and/or pre-divider for this freq when the
source pll is P_VIDEO_PLL0_OUT_MAIN PLL?

+					required-opps = <&rpmhpd_opp_turbo>;
+				};
+			};
  		};
videocc: clock-controller@ab00000 {




--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux