[PATCH 3/3] ARM: dts: rockchip: Remove 0 point in backlight

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



After the "PWM backlight interpolation adjustments" patches, the
backlight interpolation works a little differently. The way these
dts files were working before was relying on a bug (IMHO).

Remove the 0-3 range since otherwise we would have a 252 long
interpolation that would slowly go between 0 and 3, looking really bad
in userspace.

We'll still have the 0% point available to userspace, "backlight:
pwm_bl: Artificially add 0% during interpolation" takes care of that.

Signed-off-by: Alexandru Stan <amstan@xxxxxxxxxxxx>
---

 arch/arm/boot/dts/rk3288-veyron-jaq.dts    | 2 +-
 arch/arm/boot/dts/rk3288-veyron-minnie.dts | 2 +-
 arch/arm/boot/dts/rk3288-veyron-tiger.dts  | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
index 171ba6185b6d..af4b21636c08 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -20,7 +20,7 @@ / {
 
 &backlight {
 	/* Jaq panel PWM must be >= 3%, so start non-zero brightness at 8 */
-	brightness-levels = <0 8 255>;
+	brightness-levels = <8 255>;
 	num-interpolated-steps = <247>;
 };
 
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 383fad1a88a1..b25aa2f3cbee 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -39,7 +39,7 @@ volum_up {
 
 &backlight {
 	/* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */
-	brightness-levels = <0 3 255>;
+	brightness-levels = <3 255>;
 	num-interpolated-steps = <252>;
 };
 
diff --git a/arch/arm/boot/dts/rk3288-veyron-tiger.dts b/arch/arm/boot/dts/rk3288-veyron-tiger.dts
index 069f0c2c1fdf..52a84cbe7a90 100644
--- a/arch/arm/boot/dts/rk3288-veyron-tiger.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-tiger.dts
@@ -23,7 +23,7 @@ / {
 
 &backlight {
 	/* Tiger panel PWM must be >= 1%, so start non-zero brightness at 3 */
-	brightness-levels = <0 3 255>;
+	brightness-levels = <3 255>;
 	num-interpolated-steps = <252>;
 };
 
-- 
2.27.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux