The ov5640 sensor does not support lanes reconfiguration according
to version of the datasheet I have (version 2.03) and the driver
does not parse the properties to try to reconfigure them.
Fix the properties values in the camera and cci node.
Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
Loic, I see you added the camera nodes in
39e0ce6cd1bf ("arm64: dts: qcom: apq8016-sbc: Add CCI/Sensor nodes")
Do you have any idea how lanes could be swapped if, from my understanding,
nor the sensor nor the driver supports that ?
Thanks
j
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 8a4b790aa7ff..fe6613676e45 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -591,8 +591,8 @@ ports {
port@0 {
reg = <0>;
csiphy0_ep: endpoint {
- clock-lanes = <1>;
- data-lanes = <0 2>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
remote-endpoint = <&ov5640_ep>;
status = "okay";
};
@@ -627,8 +627,8 @@ camera_rear@3b {
port {
ov5640_ep: endpoint {
- clock-lanes = <1>;
- data-lanes = <0 2>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
remote-endpoint = <&csiphy0_ep>;
};
};
--
2.27.0
