+Biju.
> -----Original Message-----
> From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> Sent: 15 July 2020 09:44
> To: Biju Das <biju.das@xxxxxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>; Mark Rutland <mark.rutland@xxxxxxx>; Yoshihiro Shimoda
> <yoshihiro.shimoda.uh@xxxxxxxxxxx>; Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>; Heikki Krogerus
> <heikki.krogerus@xxxxxxxxxxxxxxx>; Felipe Balbi <balbi@xxxxxxxxxx>; USB list <linux-usb@xxxxxxxxxxxxxxx>; open list:OPEN FIRMWARE AND
> FLATTENED DEVICE TREE BINDINGS <devicetree@xxxxxxxxxxxxxxx>; Simon Horman <horms@xxxxxxxxxxxx>; Geert Uytterhoeven
> <geert+renesas@xxxxxxxxx>; Chris Paterson <Chris.Paterson2@xxxxxxxxxxx>; Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>; Linux-
> Renesas <linux-renesas-soc@xxxxxxxxxxxxxxx>; Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> Subject: Re: [PATCH RESEND v7 1/3] dt-bindings: usb: hd3ss3220 device tree binding document
>
> Hi Biju,
>
> On Wed, Sep 4, 2019 at 10:22 AM Biju Das <biju.das@xxxxxxxxxxxxxx> wrote:
> > Add device tree binding document for TI HD3SS3220 Type-C DRP port
> > controller driver.
> >
> > Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
>
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
> > @@ -0,0 +1,38 @@
> > +TI HD3SS3220 TypeC DRP Port Controller.
> > +
> > +Required properties:
> > + - compatible: Must be "ti,hd3ss3220".
> > + - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin.
> > + - interrupts: An interrupt specifier.
> > +
> > +Required sub-node:
> > + - connector: The "usb-c-connector" attached to the hd3ss3220 chip. The
> > + bindings of the connector node are specified in:
> > +
> > + Documentation/devicetree/bindings/connector/usb-connector.txt
> > +
> > +Example:
> > +hd3ss3220@47 {
> > + compatible = "ti,hd3ss3220";
> > + reg = <0x47>;
> > + interrupt-parent = <&gpio6>;
> > + interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> > +
> > + connector {
> > + compatible = "usb-c-connector";
> > + label = "USB-C";
> > + data-role = "dual";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@1 {
>
> This does not comply with
> Documentation/devicetree/bindings/connector/usb-connector.yaml:
>
> connector: ports: 'port@0' is a required property
>
> > + reg = <1>;
> > + hd3ss3220_ep: endpoint {
> > + remote-endpoint = <&usb3_role_switch>;
> > + };
> > + };
> > + };
> > + };
> > +};
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
Renesas Electronics Europe GmbH, Geschaeftsfuehrer/President: Carsten Jauch, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany, Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647
