Add device tree binding document for TI HD3SS3220 Type-C DRP port
controller driver.
Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
V7--> V7 RESEND
* Added Rob's Reviewed by tag.
v6-->V7
* Removed Rob's reviewed by tag, since there is a rework
* Incorporated Sergie and Shimoda-San's review comment
(https://patchwork.kernel.org/patch/10944629/)
V5-->V6
* No change.
V4-->V5
* No Change.
V3-->V4
* No Change.
V2-->V3
* Added Rob's Reviewed by tag.
V1-->V2
* Added connector node.
* updated the example with connector node.
---
.../devicetree/bindings/usb/ti,hd3ss3220.txt | 38 ++++++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
new file mode 100644
index 0000000..25780e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
@@ -0,0 +1,38 @@
+TI HD3SS3220 TypeC DRP Port Controller.
+
+Required properties:
+ - compatible: Must be "ti,hd3ss3220".
+ - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin.
+ - interrupts: An interrupt specifier.
+
+Required sub-node:
+ - connector: The "usb-c-connector" attached to the hd3ss3220 chip. The
+ bindings of the connector node are specified in:
+
+ Documentation/devicetree/bindings/connector/usb-connector.txt
+
+Example:
+hd3ss3220@47 {
+ compatible = "ti,hd3ss3220";
+ reg = <0x47>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ hd3ss3220_ep: endpoint {
+ remote-endpoint = <&usb3_role_switch>;
+ };
+ };
+ };
+ };
+};
--
2.7.4
