[PATCH v3 1/4] dt-bindings: input: gpio-vibrator: Don't require enable-gpios

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It is possible to turn the motor on/off just by enabling/disabling
the vcc-supply. Change the binding to require either enable-gpios
or vcc-supply or both.

Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/input/gpio-vibrator.yaml | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
index 2384465eaa19..082ac06471db 100644
--- a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
@@ -24,7 +24,12 @@ properties:
 
 required:
   - compatible
-  - enable-gpios
+
+anyOf:
+  - required:
+    - enable-gpios
+  - required:
+    - vcc-supply
 
 additionalProperties: false
 
-- 
2.27.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux